MCGEE #1-8
API 3500321965 · Alfalfa County, Oklahoma
Completion
Oklahoma files 1 completion report for this well. One carries a production test the operator filed.
Completion 0
STRAIGHT HOLEACOILInterval
| Formation | Produced | Perforated (ft) |
|---|---|---|
| SIMPSON | OIL | 5,744–5,748 |
Production test
| Tested | Oil (bbl/d) | Gas (MCF/d) | Water (bbl/d) | Gravity (°API) | Shut-in (psi) | Choke |
|---|---|---|---|---|---|---|
| 2010-08-08 | 40 | 0 | 0 | — | 0 | 64/64 |
A production test is one measurement the operator made on one day and filed with Oklahoma. It is not a monthly average and it does not describe how the well produced afterwards. The choke size is shown exactly as filed: Oklahoma records it in inches on some reports and in sixty-fourths of an inch on others, and names the unit on neither. A dash is a measurement Oklahoma did not file, or one it filed outside any physically possible range.
Casing
| String | Size (in) | Weight (lb/ft) | Grade | Set (ft) | Cement (sacks) |
|---|---|---|---|---|---|
| PRODUCTION | 5 1/2 | 17 | J-55 | 6,085 | 240 |
| SURFACE | 8 5/8 | 24 | J-55 | 916 | 475 |
Drilling permit
Oklahoma files 1 application to drill this well, naming 10 target formations. A permit records what an operator asked to do, not what it did. A target formation is where the operator aimed, and the hole may have missed it, stopped short of it or never been drilled.
Filed 2010-05-18
WRADRStraight holeTarget formations
| Formation | Expected top (ft) |
|---|---|
| DOUGLAS SD | 4,260 |
| TONKAWA | 4,340 |
| LANSING-KANSAS CITY | 4,460 |
| DES MOINES | 4,728 |
| MISSISSIPPI | 4,977 |
| MISENER | 5,220 |
| HUNTON | 5,360 |
| VIOLA | 5,490 |
| SIMPSON | 5,640 |
| ARBUCKLE | 5,827 |
An expected top is the depth the operator predicted before drilling, on the application it filed with Oklahoma. It is not a measurement of where the formation was found.
Location
36.920211, -98.519793
Every well in Alfalfa County, Oklahoma
Oklahoma state record, from OK_wells_rbdms-wells.parquet. Corpus built 2026-09-11.