DUSU #5-59A
API 3500520468 · Atoka County, Oklahoma
Completion
Oklahoma files 1 completion report for this well. One carries a production test the operator filed.
Completion 0
STRAIGHT HOLEACGASInterval
| Formation | Produced | Perforated (ft) | Treatment |
|---|---|---|---|
| STANLEY | GAS | 2,026–2,516 | Frac |
Production tests
| Tested | Oil (bbl/d) | Gas (MCF/d) | Water (bbl/d) | Gravity (°API) | Shut-in (psi) | Choke |
|---|---|---|---|---|---|---|
| 2019-11-03 | 10 | 0 | 0 | 34 | 285 | 24/64 |
| 2020-03-03 | 7 | 0 | 0 | 34 | 150 | OPEN |
| 2020-05-05 | 12 | 99 | 0 | 31 | 290 | OPEN |
| 2023-02-06 | 2 | 0 | 0 | 32 | 90 | 0 |
A production test is one measurement the operator made on one day and filed with Oklahoma. It is not a monthly average and it does not describe how the well produced afterwards. The choke size is shown exactly as filed: Oklahoma records it in inches on some reports and in sixty-fourths of an inch on others, and names the unit on neither. A dash is a measurement Oklahoma did not file, or one it filed outside any physically possible range.
Casing
| String | Size (in) | Weight (lb/ft) | Grade | Set (ft) | Cement (sacks) |
|---|---|---|---|---|---|
| PRODUCTION | 5 1/2 | 17 / 20 | N-80 | 3,204 | 700 |
| SURFACE | 9 5/8 | 36 | N-80 | 354 | 175 |
Drilling permit
Oklahoma files 1 application to drill this well, naming 1 target formation. A permit records what an operator asked to do, not what it did. A target formation is where the operator aimed, and the hole may have missed it, stopped short of it or never been drilled.
Filed 2018-11-08
WRADRStraight holeTarget formation
| Formation | Expected top (ft) |
|---|---|
| STANLEY UP | 1,833 |
An expected top is the depth the operator predicted before drilling, on the application it filed with Oklahoma. It is not a measurement of where the formation was found.
Location
34.579776, -95.754561
Every well in Atoka County, Oklahoma
Oklahoma state record, from OK_wells_rbdms-wells.parquet. Corpus built 2026-09-11.