DUSU #5-53A

API 3500520469 · Atoka County, Oklahoma

ACGAS
API
3500520469
Operator
WESTERN OIL AND GAS DEVELOPMENT CORP
County
Atoka

Completions

Oklahoma files 2 completion reports for this well. One carries a production test the operator filed.

Completion 0

STRAIGHT HOLEACGAS
Spudded
2019-07-08
Drilling finished
2019-07-31
Completed
2019-07-31
Total depth
5,830 ft
Operator
WESTERN OIL AND GAS DEVELOPMENT CORP

Casing

StringSize (in)Weight (lb/ft)GradeSet (ft)Cement (sacks)
PRODUCTION5 1/217PNJ5,8271,150
SURFACE9 5/8—N-80331225

Completion 0

STRAIGHT HOLEACGAS
Spudded
2019-07-08
Drilling finished
2019-07-31
Completed
2024-04-04
Total depth
5,830 ft
Operator
WESTERN OIL AND GAS DEVELOPMENT CORP

Interval

FormationProducedPerforated (ft)Treatment
STANLEY UPGAS5,014–1,970Frac

Production test

TestedOil (bbl/d)Gas (MCF/d)Water (bbl/d)Gravity (°API)Shut-in (psi)Choke
2024-04-04618203846016/64

A production test is one measurement the operator made on one day and filed with Oklahoma. It is not a monthly average and it does not describe how the well produced afterwards. The choke size is shown exactly as filed: Oklahoma records it in inches on some reports and in sixty-fourths of an inch on others, and names the unit on neither. A dash is a measurement Oklahoma did not file, or one it filed outside any physically possible range.

Casing

StringSize (in)Weight (lb/ft)GradeSet (ft)Cement (sacks)
PRODUCTION5 1/217PNJ5,8271,150
SURFACE9 5/8—N-80331225

Drilling permit

Oklahoma files 1 application to drill this well, naming 1 target formation. A permit records what an operator asked to do, not what it did. A target formation is where the operator aimed, and the hole may have missed it, stopped short of it or never been drilled.

Filed 2018-11-08

WRADRStraight hole
Permit API
35005204690000
Operator
WESTERN OIL AND GAS DEVELOPMENT CORP
Well type
GAS
Approved
2018-11-08
Expires
2020-05-08
Proposed depth
2,100 ft
Surface casing
330 ft
Ground elevation
752 ft

Target formation

FormationExpected top (ft)
STANLEY UP1,944

An expected top is the depth the operator predicted before drilling, on the application it filed with Oklahoma. It is not a measurement of where the formation was found.

Location

34.581767, -95.749823

34.58177, -95.74982 · Surface location as filed with Oklahoma

Every well in Atoka County, Oklahoma

Oklahoma state record, from OK_wells_rbdms-wells.parquet. Corpus built 2026-09-11.