SARA LEA #1-32
API 3501522135 · Caddo County, Oklahoma
Completions
Oklahoma files 2 completion reports for this well. 2 carry a production test the operator filed.
Completion 1
ACOILIntervals
| Formation | Produced | Top (ft) | Perforated (ft) | Treatment |
|---|---|---|---|---|
| WADE | OIL | 6,780 | 6,780–6,974 | Frac |
| CULP | GAS | 9,902 | 9,902–10,200 | Frac |
| MELTON | GAS | 10,302 | 10,302–10,370 | Frac |
Production tests
| Tested | Oil (bbl/d) | Gas (MCF/d) | Water (bbl/d) | Gravity (°API) | Shut-in (psi) | Choke |
|---|---|---|---|---|---|---|
| 1991-07-24 | 333 | 499 | 0 | 37 | 1,600 | 64/64 |
| 1991-08-24 | 358 | 1,076 | 36 | 39.4 | 1,500 | 64/64 |
| 1992-04-30 | 329 | 105 | 3 | 35 | 250 | 64/64 |
A production test is one measurement the operator made on one day and filed with Oklahoma. It is not a monthly average and it does not describe how the well produced afterwards. The choke size is shown exactly as filed: Oklahoma records it in inches on some reports and in sixty-fourths of an inch on others, and names the unit on neither. A dash is a measurement Oklahoma did not file, or one it filed outside any physically possible range.
Casing
| String | Size (in) | Weight (lb/ft) | Grade | Set (ft) | Cement (sacks) |
|---|---|---|---|---|---|
| PRODUCTION | 5.5 | 17 | N-80 | 10,955 | 750 |
| CONDUCTOR | 20 | 94 | H40 | 43 | 29 |
| SURFACE | 13.375 | 54.5 | J-55 | 1,045 | 950 |
Completion 1
ACOILIntervals
| Formation | Produced | Top (ft) | Perforated (ft) | Treatment |
|---|---|---|---|---|
| WADE | OIL | 6,780 | 6,780–6,974 | Frac |
| CULP | OIL | 9,902 | 9,902–10,200 | Frac |
| MELTON | OIL | 10,302 | 10,302–10,370 | Frac |
Production tests
| Tested | Oil (bbl/d) | Gas (MCF/d) | Water (bbl/d) | Gravity (°API) | Shut-in (psi) | Choke |
|---|---|---|---|---|---|---|
| 1991-07-24 | 333 | 499 | 0 | 37 | 1,600 | 64/64 |
| 1991-08-24 | 358 | 1,076 | 36 | 39.4 | 1,500 | 64/64 |
| 1992-04-30 | 329 | 105 | 3 | 35 | 250 | 64/64 |
A production test is one measurement the operator made on one day and filed with Oklahoma. It is not a monthly average and it does not describe how the well produced afterwards. The choke size is shown exactly as filed: Oklahoma records it in inches on some reports and in sixty-fourths of an inch on others, and names the unit on neither. A dash is a measurement Oklahoma did not file, or one it filed outside any physically possible range.
Casing
| String | Size (in) | Weight (lb/ft) | Grade | Set (ft) | Cement (sacks) |
|---|---|---|---|---|---|
| PRODUCTION | 5.5 | 17 | N-80 | 10,955 | 750 |
| CONDUCTOR | 20 | 94 | H40 | 43 | 29 |
| SURFACE | 13.375 | 54.5 | J-55 | 1,045 | 950 |
Drilling permits
Oklahoma files 2 applications to drill this well, naming 8 target formations. A permit records what an operator asked to do, not what it did. A target formation is where the operator aimed, and the hole may have missed it, stopped short of it or never been drilled.
Filed 1991-03-27
WRADRTarget formations
| Formation | Expected top (ft) |
|---|---|
| CISCO | 6,700 |
| WADE | 8,200 |
| MEDRANO | 9,300 |
| MARCHAND | 9,560 |
| CULP | 10,100 |
| MELTON | 10,500 |
| DEESE | 10,800 |
An expected top is the depth the operator predicted before drilling, on the application it filed with Oklahoma. It is not a measurement of where the formation was found.
Filed 1992-03-19
WRARCTarget formation
| Formation | Expected top (ft) |
|---|---|
| WADE | 6,908 |
An expected top is the depth the operator predicted before drilling, on the application it filed with Oklahoma. It is not a measurement of where the formation was found.
Location
34.946413, -98.167489
Every well in Caddo County, Oklahoma
Oklahoma state record, from OK_wells_rbdms-wells.parquet. Corpus built 2026-09-11.