DARLA #1-28H
API 3501523205 · Caddo County, Oklahoma
Completion
Oklahoma files 1 completion report for this well. One carries a production test the operator filed.
Completion 0
HORIZONTAL HOLEPANTInterval
| Formation | Produced | Perforated (ft) | Treatment |
|---|---|---|---|
| MEDRANO | OIL | 9,819–12,496 | Acid, Frac |
Production test
| Tested | Oil (bbl/d) | Gas (MCF/d) | Water (bbl/d) | Gravity (°API) | Shut-in (psi) | Choke |
|---|---|---|---|---|---|---|
| 2013-02-11 | 92 | 0 | 172 | — | 3,120 | 64/64 |
A production test is one measurement the operator made on one day and filed with Oklahoma. It is not a monthly average and it does not describe how the well produced afterwards. The choke size is shown exactly as filed: Oklahoma records it in inches on some reports and in sixty-fourths of an inch on others, and names the unit on neither. A dash is a measurement Oklahoma did not file, or one it filed outside any physically possible range.
Casing
| String | Size (in) | Weight (lb/ft) | Grade | Set (ft) | Cement (sacks) |
|---|---|---|---|---|---|
| PRODUCTION | 7 | 26 | P-110 | 9,942 | 250 |
| LINER | 4 1/2 | 11.6 | P-110 | 2,958 | 325 |
| CONDUCTOR | 20 | — | — | 60 | 9 |
| SURFACE | 9 5/8 | 36 | J-55 | 948 | 385 |
Drilling permit
Oklahoma files 1 application to drill this well, naming 5 target formations. A permit records what an operator asked to do, not what it did. A target formation is where the operator aimed, and the hole may have missed it, stopped short of it or never been drilled.
Filed 2012-10-11
WRADRHorizontal holeTarget formations
| Formation | Expected top (ft) |
|---|---|
| WABAUNSEE | 6,038 |
| SHAWNEE | 7,016 |
| DOUGLAS | 8,063 |
| WADE | 8,267 |
| MEDRANO | 9,750 |
An expected top is the depth the operator predicted before drilling, on the application it filed with Oklahoma. It is not a measurement of where the formation was found.
Every well in Caddo County, Oklahoma
Oklahoma state record, from OK_wells_rbdms-wells.parquet. Corpus built 2026-09-11.