LECK UNIT #1
API 3501720237 · Canadian County, Oklahoma
Completion
Oklahoma files 1 completion report for this well. One carries a production test the operator filed.
Completion 1
STRAIGHT HOLEACGASInterval
| Formation | Produced | Perforated (ft) | Treatment |
|---|---|---|---|
| CHEROKEE | GAS | 9,972–9,987 | Acid, Frac |
Production test
| Tested | Oil (bbl/d) | Gas (MCF/d) | Water (bbl/d) | Gravity (°API) | Shut-in (psi) | Choke |
|---|---|---|---|---|---|---|
| 2020-01-10 | 3 | 56 | 5 | 58 | 2,300 | OPEN |
A production test is one measurement the operator made on one day and filed with Oklahoma. It is not a monthly average and it does not describe how the well produced afterwards. The choke size is shown exactly as filed: Oklahoma records it in inches on some reports and in sixty-fourths of an inch on others, and names the unit on neither. A dash is a measurement Oklahoma did not file, or one it filed outside any physically possible range.
Casing
| String | Size (in) | Weight (lb/ft) | Grade | Set (ft) | Cement (sacks) |
|---|---|---|---|---|---|
| PRODUCTION | 9 5/8 | 40 | J-95 | 10,654 | 700 |
| LINER | 7 5/8 | 33.7 | S-95 | 965 | 500 |
| LINER | 5 1/2 | 17 | N-80 | 10,222 | 100 |
| CONDUCTOR | 20 | 60 | J-55 | 60 | 0 |
| SURFACE | 3 3/8 | 54 | K-55 | 1,478 | 1,400 |
Drilling permit
Oklahoma files 1 application to drill this well, naming 1 target formation. A permit records what an operator asked to do, not what it did. A target formation is where the operator aimed, and the hole may have missed it, stopped short of it or never been drilled.
Filed 2019-11-21
WRARCStraight holeTarget formation
| Formation | Expected top (ft) |
|---|---|
| CHEROKEE | 9,974 |
An expected top is the depth the operator predicted before drilling, on the application it filed with Oklahoma. It is not a measurement of where the formation was found.
Location
35.583887, -98.273438
Every well in Canadian County, Oklahoma
Oklahoma state record, from OK_wells_rbdms-wells.parquet. Corpus built 2026-09-11.