HAMBY #3-4
API 3501723550 · Canadian County, Oklahoma
Completions
Oklahoma files 3 completion reports for this well. One carries a production test the operator filed.
Completion 1
PAGASCasing
| String | Size (in) | Weight (lb/ft) | Grade | Set (ft) | Cement (sacks) |
|---|---|---|---|---|---|
| — | — | — | — | — | 0 |
Completion 1
PAGASCasing
| String | Size (in) | Weight (lb/ft) | Grade | Set (ft) | Cement (sacks) |
|---|---|---|---|---|---|
| — | — | — | — | — | 0 |
Completion 2
STRAIGHT HOLEPAGASInterval
| Formation | Produced | Perforated (ft) | Treatment |
|---|---|---|---|
| SKINNER | TA | 10,307–10,403 | Frac |
Production test
| Tested | Oil (bbl/d) | Gas (MCF/d) | Water (bbl/d) | Gravity (°API) | Shut-in (psi) | Choke |
|---|---|---|---|---|---|---|
| 2013-06-01 | 0 | 179 | 3 | — | 0 | 64/64 |
A production test is one measurement the operator made on one day and filed with Oklahoma. It is not a monthly average and it does not describe how the well produced afterwards. The choke size is shown exactly as filed: Oklahoma records it in inches on some reports and in sixty-fourths of an inch on others, and names the unit on neither. A dash is a measurement Oklahoma did not file, or one it filed outside any physically possible range.
Casing
| String | Size (in) | Weight (lb/ft) | Grade | Set (ft) | Cement (sacks) |
|---|---|---|---|---|---|
| INTERMEDIATE | 5-1/2 | 17# | P-110 | 10,818 | 1,000 |
| LINER | 3-1/2 | 12.95# | P-110 | 657 | 90 |
| SURFACE | 9-5/8 | 36# | J-55 | 1,023 | 459 |
Drilling permits
Oklahoma files 2 applications to drill this well, naming 3 target formations. A permit records what an operator asked to do, not what it did. A target formation is where the operator aimed, and the hole may have missed it, stopped short of it or never been drilled.
Filed 2000-02-22
WRADRTarget formation
| Formation | Expected top (ft) |
|---|---|
| MORROW-SPRINGER | 11,040 |
An expected top is the depth the operator predicted before drilling, on the application it filed with Oklahoma. It is not a measurement of where the formation was found.
Filed 2013-04-05
WRARCStraight holeTarget formations
| Formation | Expected top (ft) |
|---|---|
| PRUE | 10,040 |
| SKINNER | 10,356 |
An expected top is the depth the operator predicted before drilling, on the application it filed with Oklahoma. It is not a measurement of where the formation was found.
Location
35.461553, -98.162365
Every well in Canadian County, Oklahoma
Oklahoma state record, from OK_wells_rbdms-wells.parquet. Corpus built 2026-09-11.