ARMACOST #10-33H
API 3501724761 · Canadian County, Oklahoma
Completion
Oklahoma files 1 completion report for this well. One carries a production test the operator filed.
Completion 0
HORIZONTAL HOLEACGASInterval
| Formation | Produced | Perforated (ft) | Treatment |
|---|---|---|---|
| WOODFORD | GAS | 12,935–17,514 | Frac |
Production test
| Tested | Oil (bbl/d) | Gas (MCF/d) | Water (bbl/d) | Gravity (°API) | Shut-in (psi) | Choke |
|---|---|---|---|---|---|---|
| 2015-12-12 | 24 | 1,779 | 2,312 | 59 | 5,067 | 17/64 |
A production test is one measurement the operator made on one day and filed with Oklahoma. It is not a monthly average and it does not describe how the well produced afterwards. The choke size is shown exactly as filed: Oklahoma records it in inches on some reports and in sixty-fourths of an inch on others, and names the unit on neither. A dash is a measurement Oklahoma did not file, or one it filed outside any physically possible range.
Casing
| String | Size (in) | Weight (lb/ft) | Grade | Set (ft) | Cement (sacks) |
|---|---|---|---|---|---|
| INTERMEDIATE | 7 | 26 | L80 | 10,285 | 1,210 |
| INTERMEDIATE | 9 5/8 | 40 | P110 | 10,385 | 750 |
| PRODUCTION | 4 1/2 | 13.5 | P110 | 17,528 | 700 |
| CONDUCTOR | 20 | 94 | H40 | 80 | 12 |
| SURFACE | 13 3/8 | 54.5 | J55 | 1,533 | 900 |
Drilling permit
Oklahoma files 1 application to drill this well, naming 1 target formation. A permit records what an operator asked to do, not what it did. A target formation is where the operator aimed, and the hole may have missed it, stopped short of it or never been drilled.
Filed 2015-03-05
WRADRHorizontal holeTarget formation
| Formation | Expected top (ft) |
|---|---|
| WOODFORD | 12,380 |
An expected top is the depth the operator predicted before drilling, on the application it filed with Oklahoma. It is not a measurement of where the formation was found.
Location
35.638989, -98.272229
Every well in Canadian County, Oklahoma
Oklahoma state record, from OK_wells_rbdms-wells.parquet. Corpus built 2026-09-11.