CLYDE HANSEN 11_2-14N-9W #2MHX
API 3501725831 · Canadian County, Oklahoma
Completion
Oklahoma files 1 completion report for this well. One carries a production test the operator filed.
Completion 0
HORIZONTAL HOLEACOILInterval
| Formation | Produced | Top (ft) | Perforated (ft) | Treatment |
|---|---|---|---|---|
| MISSISSIPPI SOLID | OIL | 10,305 | 11,137–21,369 | Frac |
Production test
| Tested | Oil (bbl/d) | Gas (MCF/d) | Water (bbl/d) | Gravity (°API) | Shut-in (psi) | Choke |
|---|---|---|---|---|---|---|
| 2022-12-30 | 253 | 1,180 | 912 | 49.3 | 2,978 | 22/64 |
A production test is one measurement the operator made on one day and filed with Oklahoma. It is not a monthly average and it does not describe how the well produced afterwards. The choke size is shown exactly as filed: Oklahoma records it in inches on some reports and in sixty-fourths of an inch on others, and names the unit on neither. A dash is a measurement Oklahoma did not file, or one it filed outside any physically possible range.
Casing
| String | Size (in) | Weight (lb/ft) | Grade | Set (ft) | Cement (sacks) |
|---|---|---|---|---|---|
| INTERMEDIATE | 8-5/8 | 32 | L80-HC | 9,629 | 380 |
| PRODUCTION | 5-1/2" | 20 | P110-ICY | 21,449 | 1,560 |
| CONDUCTOR | 20 | 54 | J55 | 938 | 0 |
| SURFACE | 11-3/4 | 42 | J55 | 928 | 380 |
Drilling permit
Oklahoma files 1 application to drill this well, naming 1 target formation. A permit records what an operator asked to do, not what it did. A target formation is where the operator aimed, and the hole may have missed it, stopped short of it or never been drilled.
Filed 2022-06-30
WRADRMUTarget formation
| Formation | Expected top (ft) |
|---|---|
| MISSISSIPPI SOLID | 9,150 |
An expected top is the depth the operator predicted before drilling, on the application it filed with Oklahoma. It is not a measurement of where the formation was found.
Location
35.697109, -98.133386
Every well in Canadian County, Oklahoma
Oklahoma state record, from OK_wells_rbdms-wells.parquet. Corpus built 2026-09-11.