SHARRY 16_21-13N-10W #1HX
API 3501725925 · Canadian County, Oklahoma
Completions
Oklahoma files 2 completion reports for this well. One carries a production test the operator filed.
Completion 0
HORIZONTAL HOLEACGASCasing
| String | Size (in) | Weight (lb/ft) | Grade | Set (ft) | Cement (sacks) |
|---|---|---|---|---|---|
| PRODUCTION | 6" - 5.5" | 24.5# - 20# | P-110 | 23,649 | 3,630 |
| INTERMEDIATE | 9 5/8" | 40# | P-110 | 10,671 | 515 |
| SURFACE | 13 3/8" | 54.5# | J-55 | 1,025 | 540 |
Completion 0
HORIZONTAL HOLEACGASInterval
| Formation | Produced | Top (ft) | Perforated (ft) | Treatment |
|---|---|---|---|---|
| WOODFORD | GAS | 13,282 | 13,559–23,481 | Acid, Frac |
Production test
| Tested | Oil (bbl/d) | Gas (MCF/d) | Water (bbl/d) | Gravity (°API) | Shut-in (psi) | Choke |
|---|---|---|---|---|---|---|
| 2025-01-17 | 9 | 21,182 | 3,372 | 54.8 | 600 | 48/64 |
A production test is one measurement the operator made on one day and filed with Oklahoma. It is not a monthly average and it does not describe how the well produced afterwards. The choke size is shown exactly as filed: Oklahoma records it in inches on some reports and in sixty-fourths of an inch on others, and names the unit on neither. A dash is a measurement Oklahoma did not file, or one it filed outside any physically possible range.
Casing
| String | Size (in) | Weight (lb/ft) | Grade | Set (ft) | Cement (sacks) |
|---|---|---|---|---|---|
| PRODUCTION | 6" - 5.5" | 24.5# - 20# | P-110 | 23,649 | 3,630 |
| INTERMEDIATE | 9 5/8" | 40# | P-110 | 10,671 | 515 |
| SURFACE | 13 3/8" | 54.5# | J-55 | 1,025 | 540 |
Drilling permit
Oklahoma files 1 application to drill this well, naming 3 target formations. A permit records what an operator asked to do, not what it did. A target formation is where the operator aimed, and the hole may have missed it, stopped short of it or never been drilled.
Filed 2023-02-22
WRADRMUTarget formations
| Formation | Expected top (ft) |
|---|---|
| MISSISSIPPIAN | 11,348 |
| MISSISSIPPI LM | 12,405 |
| WOODFORD | 13,025 |
An expected top is the depth the operator predicted before drilling, on the application it filed with Oklahoma. It is not a measurement of where the formation was found.
Location
35.608153, -98.272659
Every well in Canadian County, Oklahoma
Oklahoma state record, from OK_wells_rbdms-wells.parquet. Corpus built 2026-09-11.