LORETTA 16_21_28-14N-9W #3HXX
API 3501725966 · Canadian County, Oklahoma
Completions
Oklahoma files 3 completion reports for this well. 2 carry a production test the operator filed.
Completion 0
HORIZONTAL HOLEACOILCasing
| String | Size (in) | Weight (lb/ft) | Grade | Set (ft) | Cement (sacks) |
|---|---|---|---|---|---|
| PRODUCTION | 5 1/2" | 20# | P-110 | 24,005 | 2,945 |
| INTERMEDIATE | 9 5/8" | 32# | P-110 | 9,418 | 480 |
| SURFACE | 13 3/8" | 54.5# | J-55 | 616 | 380 |
Completion 0
HORIZONTAL HOLEACOILInterval
| Formation | Produced | Top (ft) | Perforated (ft) | Treatment |
|---|---|---|---|---|
| WOODFORD | OIL | 10,953 | 11,284–23,839 | Frac |
Production test
| Tested | Oil (bbl/d) | Gas (MCF/d) | Water (bbl/d) | Gravity (°API) | Shut-in (psi) | Choke |
|---|---|---|---|---|---|---|
| 2024-11-22 | 279 | 2,517 | 2,802 | 52.8 | 2,333 | 64 |
A production test is one measurement the operator made on one day and filed with Oklahoma. It is not a monthly average and it does not describe how the well produced afterwards. The choke size is shown exactly as filed: Oklahoma records it in inches on some reports and in sixty-fourths of an inch on others, and names the unit on neither. A dash is a measurement Oklahoma did not file, or one it filed outside any physically possible range.
Casing
| String | Size (in) | Weight (lb/ft) | Grade | Set (ft) | Cement (sacks) |
|---|---|---|---|---|---|
| PRODUCTION | 5 1/2" | 20# | P-110 | 24,005 | 2,945 |
| INTERMEDIATE | 9 5/8" | 32# | P-110 | 9,418 | 480 |
| SURFACE | 13 3/8" | 54.5# | J-55 | 616 | 380 |
Completion 0
HORIZONTAL HOLEACOILInterval
| Formation | Produced | Top (ft) | Perforated (ft) | Treatment |
|---|---|---|---|---|
| WOODFORD | OIL | 10,953 | 11,284–23,839 | Frac |
Production test
| Tested | Oil (bbl/d) | Gas (MCF/d) | Water (bbl/d) | Gravity (°API) | Shut-in (psi) | Choke |
|---|---|---|---|---|---|---|
| 2024-11-22 | 279 | 2,517 | 2,802 | 52.8 | 2,333 | 64 |
A production test is one measurement the operator made on one day and filed with Oklahoma. It is not a monthly average and it does not describe how the well produced afterwards. The choke size is shown exactly as filed: Oklahoma records it in inches on some reports and in sixty-fourths of an inch on others, and names the unit on neither. A dash is a measurement Oklahoma did not file, or one it filed outside any physically possible range.
Casing
| String | Size (in) | Weight (lb/ft) | Grade | Set (ft) | Cement (sacks) |
|---|---|---|---|---|---|
| PRODUCTION | 5 1/2" | 20# | P-110 | 24,005 | 2,945 |
| INTERMEDIATE | 9 5/8" | 40# | P-110 | 9,418 | 480 |
| SURFACE | 13 3/8" | 54.5# | J-55 | 616 | 380 |
Drilling permit
Oklahoma files 1 application to drill this well, naming 1 target formation. A permit records what an operator asked to do, not what it did. A target formation is where the operator aimed, and the hole may have missed it, stopped short of it or never been drilled.
Filed 2023-05-23
WRADRMUTarget formation
| Formation | Expected top (ft) |
|---|---|
| WOODFORD | 11,100 |
An expected top is the depth the operator predicted before drilling, on the application it filed with Oklahoma. It is not a measurement of where the formation was found.
Location
35.690630, -98.163763
Every well in Canadian County, Oklahoma
Oklahoma state record, from OK_wells_rbdms-wells.parquet. Corpus built 2026-09-11.