SIMS #3H-2017X
API 3501726033 · Canadian County, Oklahoma
Completion
Oklahoma files 1 completion report for this well. One carries a production test the operator filed.
Completion 0
HORIZONTAL HOLEACGASInterval
| Formation | Produced | Top (ft) | Perforated (ft) | Treatment |
|---|---|---|---|---|
| MISSISSIPPI SOLID | GAS | 11,215 | 11,225–21,506 | Frac |
Production test
| Tested | Oil (bbl/d) | Gas (MCF/d) | Water (bbl/d) | Gravity (°API) | Shut-in (psi) | Choke |
|---|---|---|---|---|---|---|
| 2024-11-16 | 279 | 4,357 | 2,248 | 52.1 | 3,096 | 40 |
A production test is one measurement the operator made on one day and filed with Oklahoma. It is not a monthly average and it does not describe how the well produced afterwards. The choke size is shown exactly as filed: Oklahoma records it in inches on some reports and in sixty-fourths of an inch on others, and names the unit on neither. A dash is a measurement Oklahoma did not file, or one it filed outside any physically possible range.
Casing
| String | Size (in) | Weight (lb/ft) | Grade | Set (ft) | Cement (sacks) |
|---|---|---|---|---|---|
| INTERMEDIATE | 9 5/8" | 40# | L-80 | 10,018 | 1,672 |
| CONDUCTOR | 20" | 78.67# | A252 | 80 | 0 |
| PRODUCTION | 5 1/2" | 23# | P-110 | 21,527 | 4,163 |
| SURFACE | 13 3/8" | 54.5# | J-55 | 1,513 | 786 |
Drilling permit
Oklahoma files 1 application to drill this well, naming 1 target formation. A permit records what an operator asked to do, not what it did. A target formation is where the operator aimed, and the hole may have missed it, stopped short of it or never been drilled.
Filed 2024-04-05
WRADRMUTarget formation
| Formation | Expected top (ft) |
|---|---|
| MISSISSIPPI SOLID | 10,758 |
An expected top is the depth the operator predicted before drilling, on the application it filed with Oklahoma. It is not a measurement of where the formation was found.
Location
35.667971, -98.179057
Every well in Canadian County, Oklahoma
Oklahoma state record, from OK_wells_rbdms-wells.parquet. Corpus built 2026-09-11.