STINE 1407 #2H-36XX
API 3501726064 · Canadian County, Oklahoma
Completions
Oklahoma files 2 completion reports for this well. One carries a production test the operator filed.
Completion 1
HORIZONTAL HOLEACOILCasing
| String | Size (in) | Weight (lb/ft) | Grade | Set (ft) | Cement (sacks) |
|---|---|---|---|---|---|
| PRODUCTION | 5 1/2 | 20 | P-110 | 22,696 | 2,110 |
| SURFACE | 13 3/8 | 54.5 | J-55 | 1,469 | 710 |
Completion 1
HORIZONTAL HOLEACOILInterval
| Formation | Produced | Top (ft) | Perforated (ft) | Treatment |
|---|---|---|---|---|
| MISSISSIPPIAN | OIL | 8,903 | 9,252–22,628 | Acid, Frac |
Production test
| Tested | Oil (bbl/d) | Gas (MCF/d) | Water (bbl/d) | Gravity (°API) | Shut-in (psi) | Choke |
|---|---|---|---|---|---|---|
| 2025-03-25 | 1,203 | 2,236 | 1,272 | 44 | 2,000 | 128 |
A production test is one measurement the operator made on one day and filed with Oklahoma. It is not a monthly average and it does not describe how the well produced afterwards. The choke size is shown exactly as filed: Oklahoma records it in inches on some reports and in sixty-fourths of an inch on others, and names the unit on neither. A dash is a measurement Oklahoma did not file, or one it filed outside any physically possible range.
Casing
| String | Size (in) | Weight (lb/ft) | Grade | Set (ft) | Cement (sacks) |
|---|---|---|---|---|---|
| PRODUCTION | 5 1/2 | 20 | P-110 | 22,696 | 2,110 |
| SURFACE | 13 3/8 | 54.5 | J-55 | 1,469 | 710 |
Drilling permits
Oklahoma files 2 applications to drill this well, naming 2 target formations. A permit records what an operator asked to do, not what it did. A target formation is where the operator aimed, and the hole may have missed it, stopped short of it or never been drilled.
Filed 2024-07-02
WRADRMUTarget formation
| Formation | Expected top (ft) |
|---|---|
| MISSISSIPPIAN | 7,147 |
An expected top is the depth the operator predicted before drilling, on the application it filed with Oklahoma. It is not a measurement of where the formation was found.
Filed 2024-07-24
WRAAMMUTarget formation
| Formation | Expected top (ft) |
|---|---|
| MISSISSIPPIAN | 8,372 |
An expected top is the depth the operator predicted before drilling, on the application it filed with Oklahoma. It is not a measurement of where the formation was found.
Location
35.654363, -97.897575
Every well in Canadian County, Oklahoma
Oklahoma state record, from OK_wells_rbdms-wells.parquet. Corpus built 2026-09-11.