DUNLAP-MILFORD #1
API 3501922433 · Carter County, Oklahoma
Completions
Oklahoma files 2 completion reports for this well. 2 carry a production test the operator filed.
Completion 2
STRAIGHT HOLEACOILIntervals
| Formation | Produced | Perforated (ft) | Treatment |
|---|---|---|---|
| ATOKA | DRY | 5,423–5,444 | Acid, Frac |
| BROMIDE | OIL | 7,038–7,247 | Acid, Frac |
| MCLISH | OIL | 7,666–7,702 | Acid, Frac |
Production tests
| Tested | Oil (bbl/d) | Gas (MCF/d) | Water (bbl/d) | Gravity (°API) | Shut-in (psi) | Choke |
|---|---|---|---|---|---|---|
| 2012-12-03 | 1 | 0 | 1 | — | 80 | 20/64 |
| 2013-04-14 | 26 | 36 | 23 | — | 460 | — |
A production test is one measurement the operator made on one day and filed with Oklahoma. It is not a monthly average and it does not describe how the well produced afterwards. The choke size is shown exactly as filed: Oklahoma records it in inches on some reports and in sixty-fourths of an inch on others, and names the unit on neither. A dash is a measurement Oklahoma did not file, or one it filed outside any physically possible range.
Casing
| String | Size (in) | Weight (lb/ft) | Grade | Set (ft) | Cement (sacks) |
|---|---|---|---|---|---|
| INTERMEDIATE | 7 5/8 | 26.4 / 29.7 | L-80 | 8,708 | 1,380 |
| PRODUCTION | 4 1/2 | — | — | 7,846 | 425 |
| LINER | 5 | — | N-80 | 2,180 | 275 |
| SURFACE | 10 34/ | 40 | K-55 | 1,003 | 1,130 |
Completion 3
STRAIGHT HOLEACOILIntervals
| Formation | Produced | Perforated (ft) | Treatment |
|---|---|---|---|
| VIOLA | OIL | 5,849–6,702 | Acid, Frac |
| BROMIDE | OIL | 7,038–7,247 | Acid, Frac |
| MCLISH | OIL | 7,666–7,702 | Acid, Frac |
Production tests
| Tested | Oil (bbl/d) | Gas (MCF/d) | Water (bbl/d) | Gravity (°API) | Shut-in (psi) | Choke |
|---|---|---|---|---|---|---|
| 2013-04-14 | 26 | 36 | 23 | — | 460 | — |
| 2013-12-21 | 5 | 10 | 57 | — | 500 | OPEN |
A production test is one measurement the operator made on one day and filed with Oklahoma. It is not a monthly average and it does not describe how the well produced afterwards. The choke size is shown exactly as filed: Oklahoma records it in inches on some reports and in sixty-fourths of an inch on others, and names the unit on neither. A dash is a measurement Oklahoma did not file, or one it filed outside any physically possible range.
Casing
| String | Size (in) | Weight (lb/ft) | Grade | Set (ft) | Cement (sacks) |
|---|---|---|---|---|---|
| INTERMEDIATE | 7 5/8 | 26.4 / 29.7 | L-80 | 8,708 | 1,380 |
| PRODUCTION | 4 1/2 | — | — | 7,846 | 425 |
| LINER | 5 | — | N-80 | 2,180 | 275 |
| SURFACE | 10 3/4 | 40 | K-55 | 1,003 | 1,130 |
Drilling permits
Oklahoma files 2 applications to drill this well, naming 10 target formations. A permit records what an operator asked to do, not what it did. A target formation is where the operator aimed, and the hole may have missed it, stopped short of it or never been drilled.
Filed 2012-10-08
WRARCStraight holeTarget formations
| Formation | Expected top (ft) |
|---|---|
| CISCO | 800 |
| HOXBAR | 1,100 |
| DEESE | 3,000 |
| ATOKA | 4,200 |
| VIOLA | 5,824 |
| BROMIDE | 6,714 |
| MCLISH | 7,387 |
An expected top is the depth the operator predicted before drilling, on the application it filed with Oklahoma. It is not a measurement of where the formation was found.
Filed 2013-10-28
WRARCStraight holeTarget formations
| Formation | Expected top (ft) |
|---|---|
| VIOLA | 5,824 |
| BROMIDE | 6,714 |
| MCLISH | 7,387 |
An expected top is the depth the operator predicted before drilling, on the application it filed with Oklahoma. It is not a measurement of where the formation was found.
Location
34.341810, -97.464261
Every well in Carter County, Oklahoma
Oklahoma state record, from OK_wells_rbdms-wells.parquet. Corpus built 2026-09-11.