CUP CAKE #1-7
API 3501926137 · Carter County, Oklahoma
Completions
Oklahoma files 2 completion reports for this well. 2 carry a production test the operator filed.
Completion 0
STRAIGHT HOLEACOILIntervals
| Formation | Produced | Perforated (ft) | Treatment |
|---|---|---|---|
| TUSSY | OIL | 5,794–5,809 | Acid, Frac |
| CARPENTER | DRY | 5,992–5,994 | Acid, Frac |
| MORRIS | DRY | 6,124–6,150 | Acid, Frac |
| HUNTON | DRY | 6,326–6,328 | Acid, Frac |
| VIOLA | DRY | 6,572–7,102 | Acid, Frac |
Production tests
| Tested | Oil (bbl/d) | Gas (MCF/d) | Water (bbl/d) | Gravity (°API) | Shut-in (psi) | Choke |
|---|---|---|---|---|---|---|
| 2015-01-06 | 0 | 0 | 0 | — | 1,510 | — |
| 2015-01-06 | 0 | 0 | 0 | — | 1,860 | — |
| 2015-02-19 | 238 | 139 | 102 | 24.8 | 1,580 | — |
A production test is one measurement the operator made on one day and filed with Oklahoma. It is not a monthly average and it does not describe how the well produced afterwards. The choke size is shown exactly as filed: Oklahoma records it in inches on some reports and in sixty-fourths of an inch on others, and names the unit on neither. A dash is a measurement Oklahoma did not file, or one it filed outside any physically possible range.
Casing
| String | Size (in) | Weight (lb/ft) | Grade | Set (ft) | Cement (sacks) |
|---|---|---|---|---|---|
| PRODUCTION | 5 1/2 | 17 | N-80 | 7,452 | 765 |
| CONDUCTOR | 16 | — | — | 40 | 0 |
| SURFACE | 9 5/8 | 40 | J-55 | 1,243 | 475 |
Completion 1
STRAIGHT HOLEACOILIntervals
| Formation | Produced | Perforated (ft) | Treatment |
|---|---|---|---|
| TUSSY | OIL | 5,794–5,809 | Acid, Frac |
| CARPENTER | OIL | 5,992–5,994 | Acid, Frac |
| MORRIS /DES MOINES/ | OIL | 6,124–6,150 | Acid, Frac |
| HUNTON | OIL | 6,326–6,328 | Acid, Frac |
| VIOLA | OIL | 6,572–7,102 | Acid, Frac |
Production tests
| Tested | Oil (bbl/d) | Gas (MCF/d) | Water (bbl/d) | Gravity (°API) | Shut-in (psi) | Choke |
|---|---|---|---|---|---|---|
| 2015-01-06 | 0 | 0 | 0 | — | 1,510 | N/A |
| 2015-01-06 | 0 | 0 | 0 | — | 1,860 | N/A |
| 2015-02-19 | 238 | 139 | 102 | 24.8 | 1,580 | N/A |
| 2016-12-17 | 15 | 9 | 45 | 27.4 | 150 | N/A |
A production test is one measurement the operator made on one day and filed with Oklahoma. It is not a monthly average and it does not describe how the well produced afterwards. The choke size is shown exactly as filed: Oklahoma records it in inches on some reports and in sixty-fourths of an inch on others, and names the unit on neither. A dash is a measurement Oklahoma did not file, or one it filed outside any physically possible range.
Casing
| String | Size (in) | Weight (lb/ft) | Grade | Set (ft) | Cement (sacks) |
|---|---|---|---|---|---|
| PRODUCTION | 5 1/2 | 17 | N-80 | 7,452 | 765 |
| CONDUCTOR | 16 | — | — | 40 | 0 |
| SURFACE | 9 5/8 | 40 | J-55 | 1,243 | 475 |
Drilling permits
Oklahoma files 2 applications to drill this well, naming 13 target formations. A permit records what an operator asked to do, not what it did. A target formation is where the operator aimed, and the hole may have missed it, stopped short of it or never been drilled.
Filed 2014-09-23
WRADRStraight holeTarget formations
| Formation | Expected top (ft) |
|---|---|
| FUSULINID UP | 4,400 |
| FUSULINID LOW | 5,000 |
| TUSSY | 5,500 |
| CARPENTER | 5,950 |
| MORRIS | 6,050 |
| HUNTON | 6,200 |
| SYLVAN | 6,300 |
| VIOLA | 6,500 |
An expected top is the depth the operator predicted before drilling, on the application it filed with Oklahoma. It is not a measurement of where the formation was found.
Filed 2016-12-12
WRARCStraight holeTarget formations
| Formation | Expected top (ft) |
|---|---|
| TUSSY | 5,500 |
| CARPENTER | 5,950 |
| MORRIS | 6,050 |
| HUNTON | 6,200 |
| VIOLA | 6,500 |
An expected top is the depth the operator predicted before drilling, on the application it filed with Oklahoma. It is not a measurement of where the formation was found.
Location
34.316818, -97.455881
Every well in Carter County, Oklahoma
Oklahoma state record, from OK_wells_rbdms-wells.parquet. Corpus built 2026-09-11.