DRAPER #1
API 3502721498 · Cleveland County, Oklahoma
Completions
Oklahoma files 2 completion reports for this well. 2 carry a production test the operator filed.
Completion 0
DIRECTIONAL HOLEACOILIntervals
| Formation | Produced | Perforated (ft) | Treatment |
|---|---|---|---|
| BARTLESVILLE | DRY | 6,665–6,675 | Acid, Frac |
| UNCONFORMITY /SD/ | OIL | 6,736–6,750 | Acid, Frac |
| HUNTON | DRY | 6,770–6,790 | Acid, Frac |
| VIOLA | DRY | 7,145–7,246 | Acid, Frac |
| SIMPSON | DRY | 7,319–7,323 | Acid, Frac |
Production tests
| Tested | Oil (bbl/d) | Gas (MCF/d) | Water (bbl/d) | Gravity (°API) | Shut-in (psi) | Choke |
|---|---|---|---|---|---|---|
| 2018-10-02 | 0 | 0 | 160 | — | 0 | — |
| 2018-10-04 | 0 | 0 | 100 | — | 0 | — |
| 2018-10-19 | 0 | 0 | 175 | — | 20 | — |
| 2018-10-31 | 0 | 0 | 758 | — | 80 | — |
| 2018-11-29 | 0 | 0 | 48 | — | 0 | — |
| 2019-01-27 | 5 | 0 | 8 | 36 | 100 | — |
A production test is one measurement the operator made on one day and filed with Oklahoma. It is not a monthly average and it does not describe how the well produced afterwards. The choke size is shown exactly as filed: Oklahoma records it in inches on some reports and in sixty-fourths of an inch on others, and names the unit on neither. A dash is a measurement Oklahoma did not file, or one it filed outside any physically possible range.
Casing
| String | Size (in) | Weight (lb/ft) | Grade | Set (ft) | Cement (sacks) |
|---|---|---|---|---|---|
| PRODUCTION | 5 1/2 | 17 | P-110 | 7,422 | 175 |
| CONDUCTOR | 16 | 42 | — | — | 0 |
| SURFACE | 8 5/8 | 24 | J-55 | 1,345 | 600 |
Completion 1
DIRECTIONAL HOLEACOILIntervals
| Formation | Produced | Perforated (ft) | Treatment |
|---|---|---|---|
| BARTLESVILLE | DRY | 6,665–6,675 | Acid, Frac |
| UNCONFORMITY /SD/ | OIL | 6,736–6,750 | Acid, Frac |
| HUNTON | DRY | 6,770–6,790 | Acid, Frac |
| VIOLA | DRY | 7,145–7,246 | Acid, Frac |
| SIMPSON | DRY | 7,319–7,323 | Acid, Frac |
Production tests
| Tested | Oil (bbl/d) | Gas (MCF/d) | Water (bbl/d) | Gravity (°API) | Shut-in (psi) | Choke |
|---|---|---|---|---|---|---|
| 2018-10-02 | 0 | 0 | 160 | — | 0 | — |
| 2018-10-04 | 0 | 0 | 100 | — | 0 | — |
| 2018-10-19 | 0 | 0 | 175 | — | 20 | — |
| 2018-10-31 | 0 | 0 | 75 | — | 80 | — |
| 2018-11-29 | 0 | 0 | 48 | — | 0 | — |
| 2019-01-27 | 5 | 0 | 8 | 36 | 100 | — |
A production test is one measurement the operator made on one day and filed with Oklahoma. It is not a monthly average and it does not describe how the well produced afterwards. The choke size is shown exactly as filed: Oklahoma records it in inches on some reports and in sixty-fourths of an inch on others, and names the unit on neither. A dash is a measurement Oklahoma did not file, or one it filed outside any physically possible range.
Casing
| String | Size (in) | Weight (lb/ft) | Grade | Set (ft) | Cement (sacks) |
|---|---|---|---|---|---|
| PRODUCTION | 5 1/2 | 17 | P-110 | 7,422 | 175 |
| CONDUCTOR | 16 | 42 | — | — | 0 |
| SURFACE | 8 5/8 | 24 | J-55 | 1,345 | 600 |
Drilling permit
Oklahoma files 1 application to drill this well, naming 6 target formations. A permit records what an operator asked to do, not what it did. A target formation is where the operator aimed, and the hole may have missed it, stopped short of it or never been drilled.
Filed 2018-06-08
WRADRDirectional holeTarget formations
| Formation | Expected top (ft) |
|---|---|
| BARTLESVILLE | 6,350 |
| UNCONF SD | 6,400 |
| MISENER | 6,410 |
| HUNTON | 6,415 |
| VIOLA | 6,775 |
| SIMPSON | 6,975 |
An expected top is the depth the operator predicted before drilling, on the application it filed with Oklahoma. It is not a measurement of where the formation was found.
Location
35.359426, -97.323305
Every well in Cleveland County, Oklahoma
Oklahoma state record, from OK_wells_rbdms-wells.parquet. Corpus built 2026-09-11.