STOTTS (STOTTS 3) #3-30
API 3502735481 · Cleveland County, Oklahoma
Completion
Oklahoma files 1 completion report for this well. One carries a production test the operator filed.
Completion 2
STRAIGHT HOLEACOILIntervals
| Formation | Produced | Perforated (ft) | Treatment |
|---|---|---|---|
| HUNTON-BARTLESVILLE | OIL | 8,205–8,230 | Acid, Frac |
| VIOLA | GAS | 8,440–8,520 | Acid, Frac |
Production tests
| Tested | Oil (bbl/d) | Gas (MCF/d) | Water (bbl/d) | Gravity (°API) | Shut-in (psi) | Choke |
|---|---|---|---|---|---|---|
| 2019-11-04 | 5 | 0 | 3 | 38 | 0 | — |
| 2019-11-07 | 0 | 47 | 1 | — | 0 | — |
| 2019-11-07 | 5 | 47 | 4 | 38 | 0 | — |
A production test is one measurement the operator made on one day and filed with Oklahoma. It is not a monthly average and it does not describe how the well produced afterwards. The choke size is shown exactly as filed: Oklahoma records it in inches on some reports and in sixty-fourths of an inch on others, and names the unit on neither. A dash is a measurement Oklahoma did not file, or one it filed outside any physically possible range.
Casing
| String | Size (in) | Weight (lb/ft) | Grade | Set (ft) | Cement (sacks) |
|---|---|---|---|---|---|
| PRODUCTION | 7 | 26/23 | J-55/N-80 | 8,730 | 500 |
| SURFACE | 10.75 | 40 | J-55 | 1,084 | 750 |
Drilling permits
Oklahoma files 2 applications to drill this well, naming 3 target formations. A permit records what an operator asked to do, not what it did. A target formation is where the operator aimed, and the hole may have missed it, stopped short of it or never been drilled.
Filed 2019-04-30
WRARCStraight holeTarget formation
| Formation | Expected top (ft) |
|---|---|
| HUNTON-BARTLESVILLE | 8,230 |
An expected top is the depth the operator predicted before drilling, on the application it filed with Oklahoma. It is not a measurement of where the formation was found.
Filed 2019-11-01
WRARCStraight holeTarget formations
| Formation | Expected top (ft) |
|---|---|
| HUNTON-BARTLESVILLE | 8,230 |
| VIOLA | 8,400 |
An expected top is the depth the operator predicted before drilling, on the application it filed with Oklahoma. It is not a measurement of where the formation was found.
Location
35.311405, -97.561787
Every well in Cleveland County, Oklahoma
Oklahoma state record, from OK_wells_rbdms-wells.parquet. Corpus built 2026-09-11.