FRISBY #1-29
API 3504521476 · Ellis County, Oklahoma
Completion
Oklahoma files 1 completion report for this well. One carries a production test the operator filed.
Completion 1
STRAIGHT HOLEPAGASIntervals
| Formation | Produced | Perforated (ft) | Treatment |
|---|---|---|---|
| MORROW SAND | GAS | 7,778–7,918 | Acid, Frac |
| MISS'AN (CHESTER) | GAS | 7,956–7,968 | Acid, Frac |
Production test
| Tested | Oil (bbl/d) | Gas (MCF/d) | Water (bbl/d) | Gravity (°API) | Shut-in (psi) | Choke |
|---|---|---|---|---|---|---|
| 2021-10-24 | 0 | 78 | 6 | — | 120 | — |
A production test is one measurement the operator made on one day and filed with Oklahoma. It is not a monthly average and it does not describe how the well produced afterwards. The choke size is shown exactly as filed: Oklahoma records it in inches on some reports and in sixty-fourths of an inch on others, and names the unit on neither. A dash is a measurement Oklahoma did not file, or one it filed outside any physically possible range.
Casing
| String | Size (in) | Weight (lb/ft) | Grade | Set (ft) | Cement (sacks) |
|---|---|---|---|---|---|
| PRODUCTION | 5 1/2 | 17 | J-55 | 8,298 | 200 |
| CONDUCTOR | 20 | — | — | 78 | 8 |
| SURFACE | 8 5/8 | 24 | J-55 | 878 | 500 |
Drilling permit
Oklahoma files 1 application to drill this well, naming 2 target formations. A permit records what an operator asked to do, not what it did. A target formation is where the operator aimed, and the hole may have missed it, stopped short of it or never been drilled.
Filed 2021-08-12
WRARCStraight holeTarget formations
| Formation | Expected top (ft) |
|---|---|
| MORROW SD | 7,600 |
| MISSISSIPPIAN (CHESTER) | 7,954 |
An expected top is the depth the operator predicted before drilling, on the application it filed with Oklahoma. It is not a measurement of where the formation was found.
Location
36.534824, -99.692472
Every well in Ellis County, Oklahoma
Oklahoma state record, from OK_wells_rbdms-wells.parquet. Corpus built 2026-09-11.