HOUGH 35 #3H
API 3504522701 · Ellis County, Oklahoma
Completion
Oklahoma files 1 completion report for this well. One carries a production test the operator filed.
Completion 1
HORIZONTAL HOLEACGASInterval
| Formation | Produced | Perforated (ft) | Treatment |
|---|---|---|---|
| PENNSYLVANIAN MISSOURI SERIES | GAS | 8,498–12,624 | Frac |
Production test
| Tested | Oil (bbl/d) | Gas (MCF/d) | Water (bbl/d) | Gravity (°API) | Shut-in (psi) | Choke |
|---|---|---|---|---|---|---|
| 2008-02-21 | 68 | 3,055 | 0 | — | 992 | 28/64 |
A production test is one measurement the operator made on one day and filed with Oklahoma. It is not a monthly average and it does not describe how the well produced afterwards. The choke size is shown exactly as filed: Oklahoma records it in inches on some reports and in sixty-fourths of an inch on others, and names the unit on neither. A dash is a measurement Oklahoma did not file, or one it filed outside any physically possible range.
Casing
| String | Size (in) | Weight (lb/ft) | Grade | Set (ft) | Cement (sacks) |
|---|---|---|---|---|---|
| PRODUCTION | 7 | 23 | I-80 | 8,498 | 0 |
| LINER | 4 1/2 | 11.6 | N-80 | 4,237 | 0 |
| CONDUCTOR | 13 3/8 | 36 | J-55 | 649 | 206 |
| SURFACE | 9 5/8 | 36 | J-55 | 1,822 | 640 |
Drilling permit
Oklahoma files 1 application to drill this well, naming 1 target formation. A permit records what an operator asked to do, not what it did. A target formation is where the operator aimed, and the hole may have missed it, stopped short of it or never been drilled.
Filed 2007-10-24
WRADRHorizontal holeTarget formation
| Formation | Expected top (ft) |
|---|---|
| PENNSYLVANIAN MISSOURI SERIES | 8,020 |
An expected top is the depth the operator predicted before drilling, on the application it filed with Oklahoma. It is not a measurement of where the formation was found.
Location
36.245632, -99.853060
Every well in Ellis County, Oklahoma
Oklahoma state record, from OK_wells_rbdms-wells.parquet. Corpus built 2026-09-11.