ROPER #22-5H
API 3504522891 · Ellis County, Oklahoma
Completion
Oklahoma files 1 completion report for this well. One carries a production test the operator filed.
Completion 0
HORIZONTAL HOLEACNTInterval
| Formation | Produced | Perforated (ft) | Treatment |
|---|---|---|---|
| CLEVELAND | GAS | 8,834–12,176 | Frac |
Production test
| Tested | Oil (bbl/d) | Gas (MCF/d) | Water (bbl/d) | Gravity (°API) | Shut-in (psi) | Choke |
|---|---|---|---|---|---|---|
| 2010-11-15 | 0 | 1,500 | 0 | — | 0 | 18/64 |
A production test is one measurement the operator made on one day and filed with Oklahoma. It is not a monthly average and it does not describe how the well produced afterwards. The choke size is shown exactly as filed: Oklahoma records it in inches on some reports and in sixty-fourths of an inch on others, and names the unit on neither. A dash is a measurement Oklahoma did not file, or one it filed outside any physically possible range.
Casing
| String | Size (in) | Weight (lb/ft) | Grade | Set (ft) | Cement (sacks) |
|---|---|---|---|---|---|
| INTERMEDIATE | 9+5/8 | 40 | J-55 | 1,825 | 610 |
| INTERMEDIATE | 7 | 26 | P-110 | 8,584 | 270 |
| LINER | 4+1/2 | 11.6 | L-80 | 3,844 | 0 |
| CONDUCTOR | 20 | 106.5 | J-55 | 110 | 20 |
| SURFACE | 13+3/8 | 54.5 | J-55 | 794 | 665 |
Drilling permit
Oklahoma files 1 application to drill this well, naming 1 target formation. A permit records what an operator asked to do, not what it did. A target formation is where the operator aimed, and the hole may have missed it, stopped short of it or never been drilled.
Filed 2010-02-19
WRADRHorizontal holeTarget formation
| Formation | Expected top (ft) |
|---|---|
| CLEVELAND | 8,364 |
An expected top is the depth the operator predicted before drilling, on the application it filed with Oklahoma. It is not a measurement of where the formation was found.
Location
36.200894, -99.743361
Every well in Ellis County, Oklahoma
Oklahoma state record, from OK_wells_rbdms-wells.parquet. Corpus built 2026-09-11.