MONTY #1H-15
API 3504522900 · Ellis County, Oklahoma
Completion
Oklahoma files 1 completion report for this well. One carries a production test the operator filed.
Completion 1
HORIZONTAL HOLEACOILInterval
| Formation | Produced | Perforated (ft) | Treatment |
|---|---|---|---|
| COTTAGE GROVE | OIL | 9,214–12,995 | Frac |
Production test
| Tested | Oil (bbl/d) | Gas (MCF/d) | Water (bbl/d) | Gravity (°API) | Shut-in (psi) | Choke |
|---|---|---|---|---|---|---|
| 2010-08-30 | 25 | 59 | 112 | 41 | 300 | 40/64 |
A production test is one measurement the operator made on one day and filed with Oklahoma. It is not a monthly average and it does not describe how the well produced afterwards. The choke size is shown exactly as filed: Oklahoma records it in inches on some reports and in sixty-fourths of an inch on others, and names the unit on neither. A dash is a measurement Oklahoma did not file, or one it filed outside any physically possible range.
Casing
| String | Size (in) | Weight (lb/ft) | Grade | Set (ft) | Cement (sacks) |
|---|---|---|---|---|---|
| INTERMEDIATE | 9.625 | 40 | K55 | 3,032 | 225 |
| PRODUCTION | 7 | 23 & 26 | P110 | 8,925 | 130 |
| LINER | 4.5 | 13.6 | P110 | 4,230 | 0 |
| CONDUCTOR | 20 | 90 | LS | 40 | 10 |
| SURFACE | 13.375 | 48 | J55 | 318 | 400 |
Drilling permit
Oklahoma files 1 application to drill this well, naming 1 target formation. A permit records what an operator asked to do, not what it did. A target formation is where the operator aimed, and the hole may have missed it, stopped short of it or never been drilled.
Filed 2010-03-16
WRADRHorizontal holeTarget formation
| Formation | Expected top (ft) |
|---|---|
| COTTAGE GROVE | 8,650 |
An expected top is the depth the operator predicted before drilling, on the application it filed with Oklahoma. It is not a measurement of where the formation was found.
Location
35.955000, -99.525600
Every well in Ellis County, Oklahoma
Oklahoma state record, from OK_wells_rbdms-wells.parquet. Corpus built 2026-09-11.