DANDY 29/20 PA #1H
API 3504523912 · Ellis County, Oklahoma
Completion
Oklahoma files 1 completion report for this well. One carries a production test the operator filed.
Completion 0
HORIZONTAL HOLEACOILInterval
| Formation | Produced | Top (ft) | Perforated (ft) | Treatment |
|---|---|---|---|---|
| CHEROKEE | OIL | 10,550 | 10,785–20,386 | Frac |
Production test
| Tested | Oil (bbl/d) | Gas (MCF/d) | Water (bbl/d) | Gravity (°API) | Shut-in (psi) | Choke |
|---|---|---|---|---|---|---|
| 2023-11-06 | 586 | 2,287 | 2,702 | 48 | 4,727 | 24/64 |
A production test is one measurement the operator made on one day and filed with Oklahoma. It is not a monthly average and it does not describe how the well produced afterwards. The choke size is shown exactly as filed: Oklahoma records it in inches on some reports and in sixty-fourths of an inch on others, and names the unit on neither. A dash is a measurement Oklahoma did not file, or one it filed outside any physically possible range.
Casing
| String | Size (in) | Weight (lb/ft) | Grade | Set (ft) | Cement (sacks) |
|---|---|---|---|---|---|
| LINER | 4 1/2 | 13.5 | HCP-110 | 10,347 | 995 |
| INTERMEDIATE | 7 | 29 | HPP-110 | 10,570 | 1,120 |
| INTERMEDIATE | 9 5/8 | 36 | J-55 | 1,996 | 680 |
| SURFACE | 13 3/8 | 54.5 | J-55 | 477 | 480 |
Drilling permit
Oklahoma files 1 application to drill this well, naming 1 target formation. A permit records what an operator asked to do, not what it did. A target formation is where the operator aimed, and the hole may have missed it, stopped short of it or never been drilled.
Filed 2023-07-12
WRADRMUTarget formation
| Formation | Expected top (ft) |
|---|---|
| CHEROKEE | 10,550 |
An expected top is the depth the operator predicted before drilling, on the application it filed with Oklahoma. It is not a measurement of where the formation was found.
Location
35.912121, -99.776760
Every well in Ellis County, Oklahoma
Oklahoma state record, from OK_wells_rbdms-wells.parquet. Corpus built 2026-09-11.