TOMLINSON "B" #1-8
API 3504922629 · Garvin County, Oklahoma
Completion
Oklahoma files 1 completion report for this well. One carries a production test the operator filed.
Completion 1
STRAIGHT HOLEACDRYIntervals
| Formation | Produced | Perforated (ft) | Treatment |
|---|---|---|---|
| GIBSON | OIL | 6,894–6,908 | Acid, Frac |
| SYCAMORE | DRY | 7,185–7,340 | Acid, Frac |
| HUNTON | DRY | 7,642–7,880 | Acid, Frac |
| VIOLA | DRY | 8,100–8,445 | Acid, Frac |
Production test
| Tested | Oil (bbl/d) | Gas (MCF/d) | Water (bbl/d) | Gravity (°API) | Shut-in (psi) | Choke |
|---|---|---|---|---|---|---|
| 2012-05-25 | 8 | 11 | 8 | 35 | 0 | 64/64 |
A production test is one measurement the operator made on one day and filed with Oklahoma. It is not a monthly average and it does not describe how the well produced afterwards. The choke size is shown exactly as filed: Oklahoma records it in inches on some reports and in sixty-fourths of an inch on others, and names the unit on neither. A dash is a measurement Oklahoma did not file, or one it filed outside any physically possible range.
Casing
| String | Size (in) | Weight (lb/ft) | Grade | Set (ft) | Cement (sacks) |
|---|---|---|---|---|---|
| PRODUCTION | 5 1/2 | 15.5 & 17 | K-55 | 8,656 | 535 |
| SURFACE | 8 5/8 | 24 | K-55 | 867 | 450 |
Drilling permit
Oklahoma files 1 application to drill this well, naming 1 target formation. A permit records what an operator asked to do, not what it did. A target formation is where the operator aimed, and the hole may have missed it, stopped short of it or never been drilled.
Filed 2012-04-24
WRARCStraight holeTarget formation
| Formation | Expected top (ft) |
|---|---|
| GIBSON | 6,880 |
An expected top is the depth the operator predicted before drilling, on the application it filed with Oklahoma. It is not a measurement of where the formation was found.
Location
34.661189, -97.438248
Every well in Garvin County, Oklahoma
Oklahoma state record, from OK_wells_rbdms-wells.parquet. Corpus built 2026-09-11.