JACK HAMMER #1
API 3504922676 · Garvin County, Oklahoma
Completion
Oklahoma files 1 completion report for this well. One carries a production test the operator filed.
Completion 2
STRAIGHT HOLEACOILIntervals
| Formation | Produced | Perforated (ft) | Treatment |
|---|---|---|---|
| DEESE 3 (GIBSON) | OIL | 7,041–7,102 | Frac |
| DEESE 4 (HART) | OIL | 7,164–7,169 | Frac |
Production test
| Tested | Oil (bbl/d) | Gas (MCF/d) | Water (bbl/d) | Gravity (°API) | Shut-in (psi) | Choke |
|---|---|---|---|---|---|---|
| 2011-08-07 | 106 | 51 | 15 | 41 | 80 | — |
A production test is one measurement the operator made on one day and filed with Oklahoma. It is not a monthly average and it does not describe how the well produced afterwards. The choke size is shown exactly as filed: Oklahoma records it in inches on some reports and in sixty-fourths of an inch on others, and names the unit on neither. A dash is a measurement Oklahoma did not file, or one it filed outside any physically possible range.
Casing
| String | Size (in) | Weight (lb/ft) | Grade | Set (ft) | Cement (sacks) |
|---|---|---|---|---|---|
| PRODUCTION | 7 | 32 | P-110 | 8,683 | 350 |
| CONDUCTOR | 16 | — | — | 40 | 9 |
| SURFACE | 9 5/8 | 36 | H-40 | 565 | 350 |
Drilling permit
Oklahoma files 1 application to drill this well, naming 2 target formations. A permit records what an operator asked to do, not what it did. A target formation is where the operator aimed, and the hole may have missed it, stopped short of it or never been drilled.
Filed 2011-05-20
WRARCStraight holeTarget formations
| Formation | Expected top (ft) |
|---|---|
| DEESE 3 (GIBSON) | 7,087 |
| DEESE 4 (HART) | 7,268 |
An expected top is the depth the operator predicted before drilling, on the application it filed with Oklahoma. It is not a measurement of where the formation was found.
Location
34.689565, -97.455840
Every well in Garvin County, Oklahoma
Oklahoma state record, from OK_wells_rbdms-wells.parquet. Corpus built 2026-09-11.