RAMSEY #1
API 3505122618 · Grady County, Oklahoma
Completion
Oklahoma files 1 completion report for this well. One carries a production test the operator filed.
Completion 4
STRAIGHT HOLEACOILIntervals
| Formation | Produced | Perforated (ft) | Treatment |
|---|---|---|---|
| DEESE UP | OIL | 6,025–6,033 | Acid, Frac |
| DEESE LOWER | OIL | 6,190–6,206 | Acid, Frac |
| MORROW DNTHRST | OIL | 10,194–10,341 | Acid, Frac |
Production test
| Tested | Oil (bbl/d) | Gas (MCF/d) | Water (bbl/d) | Gravity (°API) | Shut-in (psi) | Choke |
|---|---|---|---|---|---|---|
| 1998-04-23 | 447 | 608 | 0 | 40 | 700 | 25/64 |
A production test is one measurement the operator made on one day and filed with Oklahoma. It is not a monthly average and it does not describe how the well produced afterwards. The choke size is shown exactly as filed: Oklahoma records it in inches on some reports and in sixty-fourths of an inch on others, and names the unit on neither. A dash is a measurement Oklahoma did not file, or one it filed outside any physically possible range.
Casing
| String | Size (in) | Weight (lb/ft) | Grade | Set (ft) | Cement (sacks) |
|---|---|---|---|---|---|
| PRODUCTION | 5 1/2 | 17 | N-80 & K-55 | 10,450 | 1,250 |
| SURFACE | 10 3/4 | 45.5 | STC | 2,900 | 1,400 |
Drilling permit
Oklahoma files 1 application to drill this well, naming 4 target formations. A permit records what an operator asked to do, not what it did. A target formation is where the operator aimed, and the hole may have missed it, stopped short of it or never been drilled.
Filed 1996-06-11
WRADRTarget formations
| Formation | Expected top (ft) |
|---|---|
| HOXBAR | 4,750 |
| DEESE | 7,190 |
| ATOKA | 8,540 |
| MORROW DNTHRST | 9,800 |
An expected top is the depth the operator predicted before drilling, on the application it filed with Oklahoma. It is not a measurement of where the formation was found.
Location
34.701732, -97.717770
Every well in Grady County, Oklahoma
Oklahoma state record, from OK_wells_rbdms-wells.parquet. Corpus built 2026-09-11.