DELK #1-10
API 3505123482 · Grady County, Oklahoma
Completion
Oklahoma files 1 completion report for this well. One carries a production test the operator filed.
Completion 0
DIRECTIONAL HOLEPANTInterval
| Formation | Produced | Perforated (ft) | Treatment |
|---|---|---|---|
| MORROW | DRY | 12,268–13,030 | Acid, Frac |
Production test
| Tested | Oil (bbl/d) | Gas (MCF/d) | Water (bbl/d) | Gravity (°API) | Shut-in (psi) | Choke |
|---|---|---|---|---|---|---|
| 2009-03-03 | 0 | 0 | 180 | — | 0 | 32/64 |
A production test is one measurement the operator made on one day and filed with Oklahoma. It is not a monthly average and it does not describe how the well produced afterwards. The choke size is shown exactly as filed: Oklahoma records it in inches on some reports and in sixty-fourths of an inch on others, and names the unit on neither. A dash is a measurement Oklahoma did not file, or one it filed outside any physically possible range.
Casing
| String | Size (in) | Weight (lb/ft) | Grade | Set (ft) | Cement (sacks) |
|---|---|---|---|---|---|
| SURFACE | 9 7/8 | 36 | J55 | 1,500 | 520 |
| INTERMEDIATE | 7 | 29 | P110 | 11,068 | 310 |
| LINER | 4 1/2 | 13.5 | P110 | 13,365 | 340 |
| CONDUCTOR | 20 | — | — | 60 | 5 |
Drilling permit
Oklahoma files 1 application to drill this well, naming 5 target formations. A permit records what an operator asked to do, not what it did. A target formation is where the operator aimed, and the hole may have missed it, stopped short of it or never been drilled.
Filed 2008-07-24
WRADRDirectional holeTarget formations
| Formation | Expected top (ft) |
|---|---|
| HOXBAR | 4,300 |
| DEESE | 6,500 |
| ATOKA | 8,350 |
| MORROW | 9,300 |
| SPRINGER | 12,250 |
An expected top is the depth the operator predicted before drilling, on the application it filed with Oklahoma. It is not a measurement of where the formation was found.
Location
34.826443, -98.023226
Every well in Grady County, Oklahoma
Oklahoma state record, from OK_wells_rbdms-wells.parquet. Corpus built 2026-09-11.