BOOHER C-55 #2

API 3505300801 · Grant County, Oklahoma

ACOIL
API
3505300801
Operator
DEM OPERATIONS INC
County
Grant

Completions

Oklahoma files 2 completion reports for this well. 2 carry a production test the operator filed.

Completion 2

STRAIGHT HOLEACOIL
Spudded
1940-05-14
Drilling finished
1940-06-29
Completed
1940-06-29
Recompleted
2011-08-23
Total depth
5,464 ft
Operator
DEM OPERATIONS INC

Interval

FormationProducedPerforated (ft)Treatment
TONKAWAOIL3,342–3,350Acid

Production test

TestedOil (bbl/d)Gas (MCF/d)Water (bbl/d)Gravity (°API)Shut-in (psi)Choke
2011-08-232056420—

A production test is one measurement the operator made on one day and filed with Oklahoma. It is not a monthly average and it does not describe how the well produced afterwards. The choke size is shown exactly as filed: Oklahoma records it in inches on some reports and in sixty-fourths of an inch on others, and names the unit on neither. A dash is a measurement Oklahoma did not file, or one it filed outside any physically possible range.

Casing

StringSize (in)Weight (lb/ft)GradeSet (ft)Cement (sacks)
PRODUCTION5 1/215.5—5,373575
SURFACE10 3/414—456300

Completion 2

STRAIGHT HOLEACOIL
Spudded
1981-02-09
Drilling finished
1981-02-16
Completed
1981-04-01
Recompleted
2011-08-23
First production
1981-04-01
Total depth
5,464 ft
Operator
DEM OPERATIONS INC

Interval

FormationProducedPerforated (ft)Treatment
TONKAWAOIL3,342–3,350Acid

Production test

TestedOil (bbl/d)Gas (MCF/d)Water (bbl/d)Gravity (°API)Shut-in (psi)Choke
2011-08-232056420—

A production test is one measurement the operator made on one day and filed with Oklahoma. It is not a monthly average and it does not describe how the well produced afterwards. The choke size is shown exactly as filed: Oklahoma records it in inches on some reports and in sixty-fourths of an inch on others, and names the unit on neither. A dash is a measurement Oklahoma did not file, or one it filed outside any physically possible range.

Casing

StringSize (in)Weight (lb/ft)GradeSet (ft)Cement (sacks)
PRODUCTION5 1/215.5—5,373575
SURFACE10 3/414—456300

Drilling permit

Oklahoma files 1 application to drill this well, naming 2 target formations. A permit records what an operator asked to do, not what it did. A target formation is where the operator aimed, and the hole may have missed it, stopped short of it or never been drilled.

Filed 2011-04-06

WRARCStraight hole
Permit API
35053008010002
Operator
DEM OPERATIONS INC
Well type
NT
Approved
2011-04-06
Expires
2011-10-06
Proposed depth
5,373 ft
Surface casing
456 ft
Ground elevation
1,017 ft

Target formations

FormationExpected top (ft)
TONKAWA3,330
PERRY3,600

An expected top is the depth the operator predicted before drilling, on the application it filed with Oklahoma. It is not a measurement of where the formation was found.

Location

36.638789, -97.533366

36.63879, -97.53337 · Surface location as filed with Oklahoma

Every well in Grant County, Oklahoma

Oklahoma state record, from OK_wells_rbdms-wells.parquet. Corpus built 2026-09-11.