JOBYNA #25-1
API 3505922636 · Harper County, Oklahoma
Completion
Oklahoma files 1 completion report for this well. One carries a production test the operator filed.
Completion 0
STRAIGHT HOLEPAGASInterval
| Formation | Produced | Perforated (ft) | Treatment |
|---|---|---|---|
| MORROW | GAS | 6,371–6,409 | Frac |
Production test
| Tested | Oil (bbl/d) | Gas (MCF/d) | Water (bbl/d) | Gravity (°API) | Shut-in (psi) | Choke |
|---|---|---|---|---|---|---|
| 2016-07-27 | 0 | 69 | 1,261 | — | 0 | OPEN |
A production test is one measurement the operator made on one day and filed with Oklahoma. It is not a monthly average and it does not describe how the well produced afterwards. The choke size is shown exactly as filed: Oklahoma records it in inches on some reports and in sixty-fourths of an inch on others, and names the unit on neither. A dash is a measurement Oklahoma did not file, or one it filed outside any physically possible range.
Casing
| String | Size (in) | Weight (lb/ft) | Grade | Set (ft) | Cement (sacks) |
|---|---|---|---|---|---|
| CONDUCTOR | 20 | — | — | 82 | 17 |
| INTERMEDIATE | 9 5/8 | 36 | J-55 | 1,010 | 400 |
| PRODUCTION | 7 | 26 | J-55 | 6,695 | 255 |
| SURFACE | 13 3/8 | 48 | J-55 | 374 | 490 |
Drilling permit
Oklahoma files 1 application to drill this well, naming 1 target formation. A permit records what an operator asked to do, not what it did. A target formation is where the operator aimed, and the hole may have missed it, stopped short of it or never been drilled.
Filed 2016-04-07
WRADRStraight holeTarget formation
| Formation | Expected top (ft) |
|---|---|
| MORROW | 6,313 |
An expected top is the depth the operator predicted before drilling, on the application it filed with Oklahoma. It is not a measurement of where the formation was found.
Location
36.705305, -99.312683
Every well in Harper County, Oklahoma
Oklahoma state record, from OK_wells_rbdms-wells.parquet. Corpus built 2026-09-11.