TYLER #6

API 3506721073 · Jefferson County, Oklahoma

ACTM
API
3506721073
Operator
HMD OIL CO INC
County
Jefferson

Completions

Oklahoma files 2 completion reports for this well. One carries a production test the operator filed.

Completion 0

STRAIGHT HOLEACTM
Spudded
2012-08-29
Drilling finished
2012-08-29
Completed
2012-11-19
First production
2012-11-09
Total depth
1,750 ft
Operator
HMD OIL CO INC

Interval

FormationProducedPerforated (ft)
HOXBAROIL1,551–1,686

Production test

TestedOil (bbl/d)Gas (MCF/d)Water (bbl/d)Gravity (°API)Shut-in (psi)Choke
2012-09-298050280—

A production test is one measurement the operator made on one day and filed with Oklahoma. It is not a monthly average and it does not describe how the well produced afterwards. The choke size is shown exactly as filed: Oklahoma records it in inches on some reports and in sixty-fourths of an inch on others, and names the unit on neither. A dash is a measurement Oklahoma did not file, or one it filed outside any physically possible range.

Casing

StringSize (in)Weight (lb/ft)GradeSet (ft)Cement (sacks)
PRODUCTION5 1/2USED—1,749250

Completion 1

STRAIGHT HOLEACTM
Spudded
2012-08-29
Drilling finished
2012-08-29
Completed
2012-11-19
Recompleted
2018-12-13
First production
2012-11-09
Total depth
1,750 ft
Operator
HMD OIL CO INC

Interval

FormationProducedPerforated (ft)Treatment
HOXBARINJ1,551–1,686Acid, Frac

Casing

StringSize (in)Weight (lb/ft)GradeSet (ft)Cement (sacks)
PRODUCTION5 1/2——1,749250

Drilling permit

Oklahoma files 1 application to drill this well, naming 2 target formations. A permit records what an operator asked to do, not what it did. A target formation is where the operator aimed, and the hole may have missed it, stopped short of it or never been drilled.

Filed 2012-08-06

WRADRStraight hole
Permit API
35067210730000
Operator
HMD OIL CO INC
Well type
TM
Approved
2012-08-06
Expires
2013-02-06
Proposed depth
2,000 ft
Ground elevation
988 ft

Target formations

FormationExpected top (ft)
PONTOTOC500
HOXBAR1,000

An expected top is the depth the operator predicted before drilling, on the application it filed with Oklahoma. It is not a measurement of where the formation was found.

Location

34.268746, -97.647422

34.26875, -97.64742 · Surface location as filed with Oklahoma

Every well in Jefferson County, Oklahoma

Oklahoma state record, from OK_wells_rbdms-wells.parquet. Corpus built 2026-09-11.