EMERY #17-1H
API 3506920156 · Johnston County, Oklahoma
Completion
Oklahoma files 1 completion report for this well. One carries a production test the operator filed.
Completion 0
HORIZONTAL HOLEACOILInterval
| Formation | Produced | Perforated (ft) | Treatment |
|---|---|---|---|
| CANEY | OIL | 11,074–15,097 | Acid, Frac |
Production tests
| Tested | Oil (bbl/d) | Gas (MCF/d) | Water (bbl/d) | Gravity (°API) | Shut-in (psi) | Choke |
|---|---|---|---|---|---|---|
| 2015-01-27 | 80 | 53 | 14 | 46 | 0 | 28/64 |
| 2015-05-16 | 210 | 102 | 95 | 45.9 | 0 | 34/64 |
A production test is one measurement the operator made on one day and filed with Oklahoma. It is not a monthly average and it does not describe how the well produced afterwards. The choke size is shown exactly as filed: Oklahoma records it in inches on some reports and in sixty-fourths of an inch on others, and names the unit on neither. A dash is a measurement Oklahoma did not file, or one it filed outside any physically possible range.
Casing
| String | Size (in) | Weight (lb/ft) | Grade | Set (ft) | Cement (sacks) |
|---|---|---|---|---|---|
| PRODUCTION | 4 1/2 | 15.1 | P-110 | 15,820 | 925 |
| SURFACE | 9 5/8 | 40 | J-55 | 1,494 | 530 |
| INTERMEDIATE | 7 | 29 | P-110 | 10,120 | 615 |
| CONDUCTOR | 20 | 94 | H-40 | 108 | 360 |
Drilling permit
Oklahoma files 1 application to drill this well, naming 1 target formation. A permit records what an operator asked to do, not what it did. A target formation is where the operator aimed, and the hole may have missed it, stopped short of it or never been drilled.
Filed 2013-11-14
WRADRHorizontal holeTarget formation
| Formation | Expected top (ft) |
|---|---|
| CANEY | 10,390 |
An expected top is the depth the operator predicted before drilling, on the application it filed with Oklahoma. It is not a measurement of where the formation was found.
Location
34.199780, -96.898980
Every well in Johnston County, Oklahoma
Oklahoma state record, from OK_wells_rbdms-wells.parquet. Corpus built 2026-09-11.