MELONE #3R
API 3507721808 · Latimer County, Oklahoma
Completions
Oklahoma files 2 completion reports for this well. One carries a production test the operator filed.
Completion 2
STRAIGHT HOLEACGASInterval
| Formation | Produced | Perforated (ft) | Treatment |
|---|---|---|---|
| ATOKA BASAL (SPIRO) | DRY | 12,626–12,632 | Frac |
Casing
| String | Size (in) | Weight (lb/ft) | Grade | Set (ft) | Cement (sacks) |
|---|---|---|---|---|---|
| PRODUCTION | 5 1/2 | 20 | P110 | 12,890 | 350 |
| INTERMEDIATE | 9 5/8 | 40 | J55 | 2,189 | 615 |
| SURFACE | 13 3/8 | 48 | H40 | 465 | 415 |
Completion 3
DIRECTIONAL HOLEACGASInterval
| Formation | Produced | Perforated (ft) | Treatment |
|---|---|---|---|
| UPPER ATOKA | GAS | 5,625–5,892 | Frac |
Production test
| Tested | Oil (bbl/d) | Gas (MCF/d) | Water (bbl/d) | Gravity (°API) | Shut-in (psi) | Choke |
|---|---|---|---|---|---|---|
| 2011-08-17 | 0 | 1,000 | 5 | — | 770 | Open |
A production test is one measurement the operator made on one day and filed with Oklahoma. It is not a monthly average and it does not describe how the well produced afterwards. The choke size is shown exactly as filed: Oklahoma records it in inches on some reports and in sixty-fourths of an inch on others, and names the unit on neither. A dash is a measurement Oklahoma did not file, or one it filed outside any physically possible range.
Casing
| String | Size (in) | Weight (lb/ft) | Grade | Set (ft) | Cement (sacks) |
|---|---|---|---|---|---|
| PRODUCTION | 4 1/2 | 11.6 | I80 | 6,100 | 180 |
| INTERMEDIATE | 9 5/8 | 40# | J55 | 2,189 | 615 |
| SURFACE | 13 3/8 | 48# | H40 | 470 | 415 |
Drilling permits
Oklahoma files 5 applications to drill this well, naming 19 target formations. A permit records what an operator asked to do, not what it did. A target formation is where the operator aimed, and the hole may have missed it, stopped short of it or never been drilled.
Filed 2010-04-08
WRADRStraight holeTarget formations
| Formation | Expected top (ft) |
|---|---|
| HARTSHORNE | 1,970 |
| ATOKA MID | 8,266 |
| ATOKA LOW | 9,178 |
| ATOKA BAS (SPIRO) | 12,565 |
An expected top is the depth the operator predicted before drilling, on the application it filed with Oklahoma. It is not a measurement of where the formation was found.
Filed 2010-04-08
WRAAMStraight holeTarget formations
| Formation | Expected top (ft) |
|---|---|
| HARTSHORNE | 1,970 |
| ATOKA MID | 8,266 |
| ATOKA LOW | 9,178 |
| ATOKA BAS (SPIRO) | 12,565 |
An expected top is the depth the operator predicted before drilling, on the application it filed with Oklahoma. It is not a measurement of where the formation was found.
Filed 2010-04-08
WRAAMStraight holeTarget formations
| Formation | Expected top (ft) |
|---|---|
| HARTSHORNE | 1,970 |
| ATOKA UP | 3,955 |
| ATOKA MID | 8,266 |
| ATOKA LOW | 9,178 |
| ATOKA BAS (SPIRO) | 12,565 |
An expected top is the depth the operator predicted before drilling, on the application it filed with Oklahoma. It is not a measurement of where the formation was found.
Filed 2011-05-31
WRADPDirectional holeTarget formations
| Formation | Expected top (ft) |
|---|---|
| HARTSHORNE | 1,793 |
| ATOKA UP | 3,958 |
An expected top is the depth the operator predicted before drilling, on the application it filed with Oklahoma. It is not a measurement of where the formation was found.
Application
REJAMDirectional holeTarget formations
| Formation | Expected top (ft) |
|---|---|
| HARTSHORNE | 1,970 |
| ATOKA MID | 8,266 |
| ATOKA LOW | 9,178 |
| ATOKA BAS (SPIRO) | 12,565 |
An expected top is the depth the operator predicted before drilling, on the application it filed with Oklahoma. It is not a measurement of where the formation was found.
Location
34.947651, -95.134185
Every well in Latimer County, Oklahoma
Oklahoma state record, from OK_wells_rbdms-wells.parquet. Corpus built 2026-09-11.