ROY REED #1-10
API 3507922105 · Leflore County, Oklahoma
Completions
Oklahoma files 2 completion reports for this well. One carries a production test the operator filed.
Completion 0
STRAIGHT HOLEACGASInterval
| Formation | Produced | Perforated (ft) | Treatment |
|---|---|---|---|
| UPPER ATOKA | GAS | 6,562–6,690 | Frac |
Casing
| String | Size (in) | Weight (lb/ft) | Grade | Set (ft) | Cement (sacks) |
|---|---|---|---|---|---|
| PRODUCTION | 4 1/2 | 11.6 | N-80 | 6,844 | 375 |
| CONDUCTOR | 16 | — | CLASS A | 35 | 9 |
| SURFACE | 9 5/8 | 36 | J-55 | 1,108 | 190 |
Completion 1
STRAIGHT HOLEACGASInterval
| Formation | Produced | Perforated (ft) | Treatment |
|---|---|---|---|
| UPPER ATOKA | GAS | 6,562–6,690 | Frac |
Production test
| Tested | Oil (bbl/d) | Gas (MCF/d) | Water (bbl/d) | Gravity (°API) | Shut-in (psi) | Choke |
|---|---|---|---|---|---|---|
| 2010-06-03 | 0 | 170 | 0 | — | 650 | full open |
A production test is one measurement the operator made on one day and filed with Oklahoma. It is not a monthly average and it does not describe how the well produced afterwards. The choke size is shown exactly as filed: Oklahoma records it in inches on some reports and in sixty-fourths of an inch on others, and names the unit on neither. A dash is a measurement Oklahoma did not file, or one it filed outside any physically possible range.
Casing
| String | Size (in) | Weight (lb/ft) | Grade | Set (ft) | Cement (sacks) |
|---|---|---|---|---|---|
| PRODUCTION | 4 1/2 | 11.6 | N-80 | 6,844 | 375 |
| CONDUCTOR | 16 | — | CLASS A | 35 | 9 |
| SURFACE | 9 5/8 | 36 | J-55 | 1,108 | 380 |
Drilling permits
Oklahoma files 2 applications to drill this well, naming 6 target formations. A permit records what an operator asked to do, not what it did. A target formation is where the operator aimed, and the hole may have missed it, stopped short of it or never been drilled.
Filed 2010-01-11
WRADRStraight holeTarget formations
| Formation | Expected top (ft) |
|---|---|
| BOOCH | 3,985 |
| HARTSHORNE | 4,812 |
| ATOKA UP | 5,460 |
An expected top is the depth the operator predicted before drilling, on the application it filed with Oklahoma. It is not a measurement of where the formation was found.
Filed 2010-01-11
WRAAMStraight holeTarget formations
| Formation | Expected top (ft) |
|---|---|
| BOOCH | 3,985 |
| HARTSHORNE | 4,812 |
| ATOKA UP | 5,460 |
An expected top is the depth the operator predicted before drilling, on the application it filed with Oklahoma. It is not a measurement of where the formation was found.
Location
35.005650, -94.861992
Every well in Leflore County, Oklahoma
Oklahoma state record, from OK_wells_rbdms-wells.parquet. Corpus built 2026-09-11.