LEPPKE #1-9H

API 3508124062 · Lincoln County, Oklahoma

ACGAS
API
3508124062
Operator
EXPRESS OIL & GAS LLC
County
Lincoln

Completions

Oklahoma files 2 completion reports for this well. 2 carry a production test the operator filed.

Completion 0

DIRECTIONAL HOLEACGAS
Spudded
2010-10-01
Drilling finished
2010-10-24
Completed
2010-10-27
First production
2010-11-13
Total depth
8,320 ft
Operator
EXPRESS OIL & GAS LLC

Interval

FormationProducedPerforated (ft)Treatment
HUNTONGAS5,762–8,320Acid, Frac

Production test

TestedOil (bbl/d)Gas (MCF/d)Water (bbl/d)Gravity (°API)Shut-in (psi)Choke
2010-12-0505010,032—0—

A production test is one measurement the operator made on one day and filed with Oklahoma. It is not a monthly average and it does not describe how the well produced afterwards. The choke size is shown exactly as filed: Oklahoma records it in inches on some reports and in sixty-fourths of an inch on others, and names the unit on neither. A dash is a measurement Oklahoma did not file, or one it filed outside any physically possible range.

Casing

StringSize (in)Weight (lb/ft)GradeSet (ft)Cement (sacks)
PRODUCTION726J55 LT & C6,056375
SURFACE9 5/836J55 ST & C431235

Completion 1

DIRECTIONAL HOLEACGAS
Spudded
2010-10-01
Drilling finished
2010-10-24
Completed
2010-10-27
First production
2010-11-13
Total depth
8,320 ft
Operator
EXPRESS OIL & GAS LLC

Interval

FormationProducedPerforated (ft)Treatment
HUNTONGAS5,872–8,320Acid, Frac

Production test

TestedOil (bbl/d)Gas (MCF/d)Water (bbl/d)Gravity (°API)Shut-in (psi)Choke
2010-12-0505010,032—0—

A production test is one measurement the operator made on one day and filed with Oklahoma. It is not a monthly average and it does not describe how the well produced afterwards. The choke size is shown exactly as filed: Oklahoma records it in inches on some reports and in sixty-fourths of an inch on others, and names the unit on neither. A dash is a measurement Oklahoma did not file, or one it filed outside any physically possible range.

Casing

StringSize (in)Weight (lb/ft)GradeSet (ft)Cement (sacks)
PRODUCTION726J-55 LT & C6,056375
SURFACE9 5/836J-55 ST & C431235

Drilling permit

Oklahoma files 1 application to drill this well, naming 1 target formation. A permit records what an operator asked to do, not what it did. A target formation is where the operator aimed, and the hole may have missed it, stopped short of it or never been drilled.

Filed 2010-09-22

WRADRDirectional holeHorizontal hole
Permit API
35081240620000
Operator
NEW DOMINION LLC
Well type
GAS
Approved
2010-09-22
Expires
2011-03-22
Proposed depth
12,336 ft
Proposed measured depth
6,058 ft
Proposed true vertical depth
5,350 ft
Surface casing
380 ft
Ground elevation
975 ft

Target formation

FormationExpected top (ft)
HUNTON5,211

An expected top is the depth the operator predicted before drilling, on the application it filed with Oklahoma. It is not a measurement of where the formation was found.

Location

35.607428, -97.086999

35.60743, -97.08700 · Surface location as filed with Oklahoma

Every well in Lincoln County, Oklahoma

Oklahoma state record, from OK_wells_rbdms-wells.parquet. Corpus built 2026-09-11.