TIPPIE MCGINTY #3
API 3508321467 · Logan County, Oklahoma
Completion
Oklahoma files 1 completion report for this well. One carries a production test the operator filed.
Completion 2
STRAIGHT HOLEPAOILInterval
| Formation | Produced | Perforated (ft) | Treatment |
|---|---|---|---|
| LAYTON | OIL | 4,561–4,768 | Acid, Frac |
Production tests
| Tested | Oil (bbl/d) | Gas (MCF/d) | Water (bbl/d) | Gravity (°API) | Shut-in (psi) | Choke |
|---|---|---|---|---|---|---|
| 1985-12-25 | 0 | 0 | 0 | — | 0 | — |
| 1985-12-28 | 0 | 0 | 0 | — | 0 | — |
| 2012-09-05 | 25 | 396 | 14 | 40 | 925 | 1 |
A production test is one measurement the operator made on one day and filed with Oklahoma. It is not a monthly average and it does not describe how the well produced afterwards. The choke size is shown exactly as filed: Oklahoma records it in inches on some reports and in sixty-fourths of an inch on others, and names the unit on neither. A dash is a measurement Oklahoma did not file, or one it filed outside any physically possible range.
Casing
| String | Size (in) | Weight (lb/ft) | Grade | Set (ft) | Cement (sacks) |
|---|---|---|---|---|---|
| PRODUCTION | 5 1/2 | 14 | K-55 | 6,248 | 450 |
| SURFACE | 8 5/8 | 24 | K-55 | 377 | 250 |
Drilling permit
Oklahoma files 1 application to drill this well, naming 4 target formations. A permit records what an operator asked to do, not what it did. A target formation is where the operator aimed, and the hole may have missed it, stopped short of it or never been drilled.
Filed 1994-03-07
WRARCTarget formations
| Formation | Expected top (ft) |
|---|---|
| LAYTON | 4,550 |
| OSWEGO | 5,400 |
| HUNTON | 5,900 |
| SIMPSON | 6,200 |
An expected top is the depth the operator predicted before drilling, on the application it filed with Oklahoma. It is not a measurement of where the formation was found.
Location
36.048686, -97.637000
Every well in Logan County, Oklahoma
Oklahoma state record, from OK_wells_rbdms-wells.parquet. Corpus built 2026-09-11.