SCHRADER #1A-5
API 3508722462 · McClain County, Oklahoma
Completion
Oklahoma files 1 completion report for this well. One carries a production test the operator filed.
Completion 0
DIRECTIONAL HOLEACOILIntervals
| Formation | Produced | Top (ft) | Perforated (ft) | Treatment |
|---|---|---|---|---|
| HART B | OIL | 9,000 | 9,122–9,144 | Acid, Frac |
| HART D | DRY | 9,350 | 9,353–9,360 | Acid, Frac |
Production tests
| Tested | Oil (bbl/d) | Gas (MCF/d) | Water (bbl/d) | Gravity (°API) | Shut-in (psi) | Choke |
|---|---|---|---|---|---|---|
| 2024-09-26 | 0 | 0 | 176 | — | 1,000 | 1" |
| 2024-10-04 | 54 | 0 | 65 | — | 1,050 | 1/2" |
A production test is one measurement the operator made on one day and filed with Oklahoma. It is not a monthly average and it does not describe how the well produced afterwards. The choke size is shown exactly as filed: Oklahoma records it in inches on some reports and in sixty-fourths of an inch on others, and names the unit on neither. A dash is a measurement Oklahoma did not file, or one it filed outside any physically possible range.
Casing
| String | Size (in) | Weight (lb/ft) | Grade | Set (ft) | Cement (sacks) |
|---|---|---|---|---|---|
| PRODUCTION | 5.5 | 20 | P110 | 9,647 | 250 |
| SURFACE | 8 5/8 | 24 | J55 | 845 | 390 |
Drilling permit
Oklahoma files 1 application to drill this well, naming 3 target formations. A permit records what an operator asked to do, not what it did. A target formation is where the operator aimed, and the hole may have missed it, stopped short of it or never been drilled.
Filed 2024-08-02
WRADRDirectional holeTarget formations
| Formation | Expected top (ft) |
|---|---|
| GIBSON | 8,463 |
| HART | 8,604 |
| OSBORN | 9,143 |
An expected top is the depth the operator predicted before drilling, on the application it filed with Oklahoma. It is not a measurement of where the formation was found.
Location
35.022004, -97.532124
Every well in McClain County, Oklahoma
Oklahoma state record, from OK_wells_rbdms-wells.parquet. Corpus built 2026-09-11.