DE HAAS #1-16X-WH
API 3509324998 · Major County, Oklahoma
Completion
Oklahoma files 1 completion report for this well. One carries a production test the operator filed.
Completion 0
HORIZONTAL HOLEPAOILInterval
| Formation | Produced | Perforated (ft) | Treatment |
|---|---|---|---|
| WOODFORD | OIL | 8,375–11,835 | Acid, Frac |
Production test
| Tested | Oil (bbl/d) | Gas (MCF/d) | Water (bbl/d) | Gravity (°API) | Shut-in (psi) | Choke |
|---|---|---|---|---|---|---|
| 2015-03-15 | 3 | 0 | 1,476 | — | 0 | OPEN |
A production test is one measurement the operator made on one day and filed with Oklahoma. It is not a monthly average and it does not describe how the well produced afterwards. The choke size is shown exactly as filed: Oklahoma records it in inches on some reports and in sixty-fourths of an inch on others, and names the unit on neither. A dash is a measurement Oklahoma did not file, or one it filed outside any physically possible range.
Casing
| String | Size (in) | Weight (lb/ft) | Grade | Set (ft) | Cement (sacks) |
|---|---|---|---|---|---|
| INTERMEDIATE | 9 5/8 | 40# | J55/P110 | 6,504 | 345 |
| PRODUCTION | 7 | 26# | P110 | 8,334 | 265 |
| LINER | 4 1/2 | 11.6# | P110 | 11,894 | 380 |
| SURFACE | 13 3/8 | 54.5# | J55 | 556 | 510 |
Drilling permit
Oklahoma files 1 application to drill this well, naming 3 target formations. A permit records what an operator asked to do, not what it did. A target formation is where the operator aimed, and the hole may have missed it, stopped short of it or never been drilled.
Filed 2014-12-05
WRADRHorizontal holeTarget formations
| Formation | Expected top (ft) |
|---|---|
| WOODFORD | 7,972 |
| HUNTON | 8,073 |
| SYLVAN | 8,108 |
An expected top is the depth the operator predicted before drilling, on the application it filed with Oklahoma. It is not a measurement of where the formation was found.
Location
36.290080, -97.160606
Every well in Major County, Oklahoma
Oklahoma state record, from OK_wells_rbdms-wells.parquet. Corpus built 2026-09-11.