KASPER 2015 #2-28H
API 3509325084 · Major County, Oklahoma
Completion
Oklahoma files 1 completion report for this well. One carries a production test the operator filed.
Completion 0
HORIZONTAL HOLEACOILInterval
| Formation | Produced | Perforated (ft) | Treatment |
|---|---|---|---|
| MERAMEC | OIL | 9,577–13,865 | Acid, Frac |
Production test
| Tested | Oil (bbl/d) | Gas (MCF/d) | Water (bbl/d) | Gravity (°API) | Shut-in (psi) | Choke |
|---|---|---|---|---|---|---|
| 2017-11-08 | 639 | 989 | 1,014 | 38 | 0 | 128 |
A production test is one measurement the operator made on one day and filed with Oklahoma. It is not a monthly average and it does not describe how the well produced afterwards. The choke size is shown exactly as filed: Oklahoma records it in inches on some reports and in sixty-fourths of an inch on others, and names the unit on neither. A dash is a measurement Oklahoma did not file, or one it filed outside any physically possible range.
Casing
| String | Size (in) | Weight (lb/ft) | Grade | Set (ft) | Cement (sacks) |
|---|---|---|---|---|---|
| INTERMEDIATE | 7 5/8 | 29.7 | L-80 | 7,338 | 605 |
| PRODUCTION | 5 1/2 | 20 | P-110 | 14,055 | 590 |
| CONDUCTOR | 20 | 133 | K-55 | 116 | 0 |
| SURFACE | 13 3/8 | 54.5 | J-55 | 516 | 560 |
Drilling permit
Oklahoma files 1 application to drill this well, naming 2 target formations. A permit records what an operator asked to do, not what it did. A target formation is where the operator aimed, and the hole may have missed it, stopped short of it or never been drilled.
Filed 2017-07-25
WRADRHorizontal holeTarget formations
| Formation | Expected top (ft) |
|---|---|
| MERAMEC | 9,245 |
| OSAGE | 9,375 |
An expected top is the depth the operator predicted before drilling, on the application it filed with Oklahoma. It is not a measurement of where the formation was found.
Location
36.174073, -98.798868
Every well in Major County, Oklahoma
Oklahoma state record, from OK_wells_rbdms-wells.parquet. Corpus built 2026-09-11.