TINSLEY #1-17
API 3510920352 · Oklahoma County, Oklahoma
Completion
Oklahoma files 1 completion report for this well. One carries a production test the operator filed.
Completion 2
STRAIGHT HOLEACGASInterval
| Formation | Produced | Perforated (ft) | Treatment |
|---|---|---|---|
| PENN LOW | GAS | 5,804–6,359 | Acid, Frac |
Production tests
| Tested | Oil (bbl/d) | Gas (MCF/d) | Water (bbl/d) | Gravity (°API) | Shut-in (psi) | Choke |
|---|---|---|---|---|---|---|
| 1998-01-01 | 1 | 200 | 0 | — | 2,100 | 20/64 |
| 2017-03-06 | 0 | 0 | 0 | — | 620 | — |
| 2017-06-22 | 0 | 353 | 2 | — | 1,200 | 10/64 |
A production test is one measurement the operator made on one day and filed with Oklahoma. It is not a monthly average and it does not describe how the well produced afterwards. The choke size is shown exactly as filed: Oklahoma records it in inches on some reports and in sixty-fourths of an inch on others, and names the unit on neither. A dash is a measurement Oklahoma did not file, or one it filed outside any physically possible range.
Casing
| String | Size (in) | Weight (lb/ft) | Grade | Set (ft) | Cement (sacks) |
|---|---|---|---|---|---|
| PRODUCTION | 4 1/2 | 11.6 | K-55 | 6,596 | 885 |
| SURFACE | 10 3/4 | 40 | K-55 | 1,230 | 900 |
Drilling permit
Oklahoma files 1 application to drill this well, naming 4 target formations. A permit records what an operator asked to do, not what it did. A target formation is where the operator aimed, and the hole may have missed it, stopped short of it or never been drilled.
Filed 1997-04-28
WRARETarget formations
| Formation | Expected top (ft) |
|---|---|
| PENNSYLVANIA LOW | 5,100 |
| PENNSYLVANIA UP | 6,140 |
| MISENER | 6,380 |
| FERNVALE | 6,510 |
An expected top is the depth the operator predicted before drilling, on the application it filed with Oklahoma. It is not a measurement of where the formation was found.
Location
35.600601, -97.539064
Every well in Oklahoma County, Oklahoma
Oklahoma state record, from OK_wells_rbdms-wells.parquet. Corpus built 2026-09-11.