HEADWELL #1102 1-31 1XH
API 3510922548 · Oklahoma County, Oklahoma
Completion
Oklahoma files 1 completion report for this well. One carries a production test the operator filed.
Completion 0
HORIZONTAL HOLEACDRYInterval
| Formation | Produced | Perforated (ft) | Treatment |
|---|---|---|---|
| MISENER-HUNTON | DRY | 7,162–14,682 | Acid, Frac |
Production test
| Tested | Oil (bbl/d) | Gas (MCF/d) | Water (bbl/d) | Gravity (°API) | Shut-in (psi) | Choke |
|---|---|---|---|---|---|---|
| 2025-11-15 | 0 | 0 | 261 | — | 240 | 20 |
A production test is one measurement the operator made on one day and filed with Oklahoma. It is not a monthly average and it does not describe how the well produced afterwards. The choke size is shown exactly as filed: Oklahoma records it in inches on some reports and in sixty-fourths of an inch on others, and names the unit on neither. A dash is a measurement Oklahoma did not file, or one it filed outside any physically possible range.
Casing
| String | Size (in) | Weight (lb/ft) | Grade | Set (ft) | Cement (sacks) |
|---|---|---|---|---|---|
| INTERMEDIATE | — | 29 | HCP-110 | 6,535 | 210 |
| LINER | 4.5 | 13.5 | HCP-110 | 8,347 | 585 |
| CONDUCTOR | — | 52.5 | — | 80 | 63 |
| SURFACE | 9.625 | 40 | J-55 | 1,370 | 360 |
Drilling permit
Oklahoma files 1 application to drill this well, naming 1 target formation. A permit records what an operator asked to do, not what it did. A target formation is where the operator aimed, and the hole may have missed it, stopped short of it or never been drilled.
Filed 2025-05-22
WRADRHorizontal holeTarget formation
| Formation | Expected top (ft) |
|---|---|
| MISENER-HUNTON | 6,342 |
An expected top is the depth the operator predicted before drilling, on the application it filed with Oklahoma. It is not a measurement of where the formation was found.
Location
35.455597, -97.354494
Every well in Oklahoma County, Oklahoma
Oklahoma state record, from OK_wells_rbdms-wells.parquet. Corpus built 2026-09-11.