VASSAR #1-13H

API 3511924264 · Payne County, Oklahoma

ACOIL
API
3511924264
Operator
CHISHOLM OIL AND GAS OPERATING LLC
County
Payne

Completion

Oklahoma files 1 completion report for this well. One carries a production test the operator filed.

Completion 0

HORIZONTAL HOLEACOIL
Spudded
2014-09-13
Drilling finished
2014-10-01
Completed
2014-11-13
First production
2014-11-22
Total depth
9,979 ft
Measured depth
9,979 ft
True vertical depth
5,055 ft
Lateral length
4,321 ft
Operator
CHISHOLM OIL AND GAS OPERATING LLC

Interval

FormationProducedPerforated (ft)Treatment
MISSISSIPPIANOIL5,187–9,875Acid, Frac

Production test

TestedOil (bbl/d)Gas (MCF/d)Water (bbl/d)Gravity (°API)Shut-in (psi)Choke
2014-11-2372492,110—1,020OPEN

A production test is one measurement the operator made on one day and filed with Oklahoma. It is not a monthly average and it does not describe how the well produced afterwards. The choke size is shown exactly as filed: Oklahoma records it in inches on some reports and in sixty-fourths of an inch on others, and names the unit on neither. A dash is a measurement Oklahoma did not file, or one it filed outside any physically possible range.

Casing

StringSize (in)Weight (lb/ft)GradeSet (ft)Cement (sacks)
PRODUCTION726P-1105,476180
LINER4 1/211.6P-1104,956490
CONDUCTOR16——70110
SURFACE9 5/836J-55775450

Drilling permit

Oklahoma files 1 application to drill this well, naming 2 target formations. A permit records what an operator asked to do, not what it did. A target formation is where the operator aimed, and the hole may have missed it, stopped short of it or never been drilled.

Filed 2014-09-04

WRADRHorizontal hole
Permit API
35119242640000
Operator
STEPHENS PRODUCTION CO
Well type
OIL
Approved
2014-09-04
Expires
2015-03-04
Proposed depth
10,400 ft
Proposed measured depth
9,979 ft
Proposed true vertical depth
5,055 ft
Proposed lateral
4,321 ft
Surface casing
770 ft
Ground elevation
1,069 ft

Target formations

FormationExpected top (ft)
MISSISSIPPIAN5,000
WOODFORD5,150

An expected top is the depth the operator predicted before drilling, on the application it filed with Oklahoma. It is not a measurement of where the formation was found.

Location

36.029536, -97.262114

36.02954, -97.26211 · Surface location as filed with Oklahoma

Every well in Payne County, Oklahoma

Oklahoma state record, from OK_wells_rbdms-wells.parquet. Corpus built 2026-09-11.