SITES #1-8
API 3512922560 · Roger Mills County, Oklahoma
Completion
Oklahoma files 1 completion report for this well. One carries a production test the operator filed.
Completion 3
STRAIGHT HOLEACGASInterval
| Formation | Produced | Perforated (ft) | Treatment |
|---|---|---|---|
| ATOKA | GAS | 15,278–15,968 | Frac |
Production test
| Tested | Oil (bbl/d) | Gas (MCF/d) | Water (bbl/d) | Gravity (°API) | Shut-in (psi) | Choke |
|---|---|---|---|---|---|---|
| 2010-11-13 | 0 | 395 | 60 | — | 250 | 64/64 |
A production test is one measurement the operator made on one day and filed with Oklahoma. It is not a monthly average and it does not describe how the well produced afterwards. The choke size is shown exactly as filed: Oklahoma records it in inches on some reports and in sixty-fourths of an inch on others, and names the unit on neither. A dash is a measurement Oklahoma did not file, or one it filed outside any physically possible range.
Casing
| String | Size (in) | Weight (lb/ft) | Grade | Set (ft) | Cement (sacks) |
|---|---|---|---|---|---|
| PRODUCTION | 5 1/2 | 20 | P-110 | 16,250 | 745 |
| LINER | 2 7/8 | 7.9 | P-110 | 544 | 60 |
| CONDUCTOR | 20 | — | — | 66 | 7 |
| INTERMEDIATE | 9 5/8 | — | — | 5,450 | 680 |
| SURFACE | 13 3/8 | 48 | H40 | 825 | 730 |
Drilling permits
Oklahoma files 2 applications to drill this well, naming 8 target formations. A permit records what an operator asked to do, not what it did. A target formation is where the operator aimed, and the hole may have missed it, stopped short of it or never been drilled.
Filed 2003-11-10
WRADRTarget formations
| Formation | Expected top (ft) |
|---|---|
| VIRGIL | 8,650 |
| MISSOURIAN | 10,180 |
| DES MOINES | 12,860 |
| ATOKA | 13,990 |
An expected top is the depth the operator predicted before drilling, on the application it filed with Oklahoma. It is not a measurement of where the formation was found.
Filed 2003-11-10
WRAAMTarget formations
| Formation | Expected top (ft) |
|---|---|
| VIRGIL | 8,650 |
| MISSOURIAN | 10,180 |
| DES MOINES | 12,860 |
| ATOKA | 13,990 |
An expected top is the depth the operator predicted before drilling, on the application it filed with Oklahoma. It is not a measurement of where the formation was found.
Location
35.439806, -99.872220
Every well in Roger Mills County, Oklahoma
Oklahoma state record, from OK_wells_rbdms-wells.parquet. Corpus built 2026-09-11.