KELLY #1-26
API 3512922926 · Roger Mills County, Oklahoma
Completion
Oklahoma files 1 completion report for this well. One carries a production test the operator filed.
Completion 1
STRAIGHT HOLEACGASIntervals
| Formation | Produced | Perforated (ft) | Treatment |
|---|---|---|---|
| TONKAWA | OIL | 10,480–10,540 | Acid, Frac |
| DESMOINES (UPR MARMATON) | DRY | 12,956–13,266 | Acid, Frac |
| DESMOINES (LWR MARMATON) | DRY | 13,525–13,704 | Acid, Frac |
| ATOKA | DRY | 15,892–15,948 | Acid, Frac |
Production test
| Tested | Oil (bbl/d) | Gas (MCF/d) | Water (bbl/d) | Gravity (°API) | Shut-in (psi) | Choke |
|---|---|---|---|---|---|---|
| 2010-10-07 | 82 | 0 | 8 | 43.3 | 0 | 64/64 |
A production test is one measurement the operator made on one day and filed with Oklahoma. It is not a monthly average and it does not describe how the well produced afterwards. The choke size is shown exactly as filed: Oklahoma records it in inches on some reports and in sixty-fourths of an inch on others, and names the unit on neither. A dash is a measurement Oklahoma did not file, or one it filed outside any physically possible range.
Casing
| String | Size (in) | Weight (lb/ft) | Grade | Set (ft) | Cement (sacks) |
|---|---|---|---|---|---|
| INTERMEDIATE | 9 5/8 | 40 | N-80 | 8,942 | 910 |
| PRODUCTION | 5 1/2 | 23 & 20 | P-110 | 16,612 | 1,198 |
| SURFACE | 12 3/8 | 48 | H-40 | 1,000 | 920 |
Drilling permits
Oklahoma files 2 applications to drill this well, naming 5 target formations. A permit records what an operator asked to do, not what it did. A target formation is where the operator aimed, and the hole may have missed it, stopped short of it or never been drilled.
Filed 2005-10-31
WRADRTarget formations
| Formation | Expected top (ft) |
|---|---|
| DES MOINES | 12,910 |
| ATOKA | 14,935 |
An expected top is the depth the operator predicted before drilling, on the application it filed with Oklahoma. It is not a measurement of where the formation was found.
Filed 2010-06-16
WRARCStraight holeTarget formations
| Formation | Expected top (ft) |
|---|---|
| DOUGLAS | 10,045 |
| DES MOINES | 12,910 |
| ATOKA | 14,935 |
An expected top is the depth the operator predicted before drilling, on the application it filed with Oklahoma. It is not a measurement of where the formation was found.
Location
35.489296, -99.922440
Every well in Roger Mills County, Oklahoma
Oklahoma state record, from OK_wells_rbdms-wells.parquet. Corpus built 2026-09-11.