LEDDY 30-16-22 #1H
API 3512923551 · Roger Mills County, Oklahoma
Completion
Oklahoma files 1 completion report for this well. One carries a production test the operator filed.
Completion 1
HORIZONTAL HOLEACOILIntervals
| Formation | Produced | Perforated (ft) | Treatment |
|---|---|---|---|
| TONKAWA | OIL | 8,650–13,064 | Acid, Frac |
| CLEVELAND | DRY | 14,430–14,824 | Acid, Frac |
Production test
| Tested | Oil (bbl/d) | Gas (MCF/d) | Water (bbl/d) | Gravity (°API) | Shut-in (psi) | Choke |
|---|---|---|---|---|---|---|
| 2012-08-14 | 90 | 136 | 602 | 42.05 | 0 | — |
A production test is one measurement the operator made on one day and filed with Oklahoma. It is not a monthly average and it does not describe how the well produced afterwards. The choke size is shown exactly as filed: Oklahoma records it in inches on some reports and in sixty-fourths of an inch on others, and names the unit on neither. A dash is a measurement Oklahoma did not file, or one it filed outside any physically possible range.
Casing
| String | Size (in) | Weight (lb/ft) | Grade | Set (ft) | Cement (sacks) |
|---|---|---|---|---|---|
| LINER | 4 1/2 | 13.5 | P-110 | 5,370 | 475 |
| INTERMEDIATE | 7 | 26 | P-110EC | 9,802 | 700 |
| LINER | 4 1/2 | 13.5 | P-110HC | 5,420 | 600 |
| SURFACE | 9 5/8 | 36 | J-55 | 1,515 | 680 |
Drilling permits
Oklahoma files 2 applications to drill this well, naming 4 target formations. A permit records what an operator asked to do, not what it did. A target formation is where the operator aimed, and the hole may have missed it, stopped short of it or never been drilled.
Filed 2011-07-25
WRADRHorizontal holeTarget formation
| Formation | Expected top (ft) |
|---|---|
| TONKAWA | 8,499 |
An expected top is the depth the operator predicted before drilling, on the application it filed with Oklahoma. It is not a measurement of where the formation was found.
Filed 2011-07-25
WRAAMHorizontal holeTarget formations
| Formation | Expected top (ft) |
|---|---|
| TONKAWA | 8,499 |
| COTTAGE GROVE | 9,078 |
| CLEVELAND | 9,888 |
An expected top is the depth the operator predicted before drilling, on the application it filed with Oklahoma. It is not a measurement of where the formation was found.
Location
35.827457, -99.573057
Every well in Roger Mills County, Oklahoma
Oklahoma state record, from OK_wells_rbdms-wells.parquet. Corpus built 2026-09-11.