BRIGHT #1-28H
API 3512923796 · Roger Mills County, Oklahoma
Completion
Oklahoma files 1 completion report for this well. One carries a production test the operator filed.
Completion 0
HORIZONTAL HOLEPAGASInterval
| Formation | Produced | Perforated (ft) | Treatment |
|---|---|---|---|
| DES MOINES | GAS | 11,380–15,933 | Acid, Frac |
Production test
| Tested | Oil (bbl/d) | Gas (MCF/d) | Water (bbl/d) | Gravity (°API) | Shut-in (psi) | Choke |
|---|---|---|---|---|---|---|
| 2013-08-18 | 28 | 704 | 208 | 53.4 | 5,735 | 18/64 |
A production test is one measurement the operator made on one day and filed with Oklahoma. It is not a monthly average and it does not describe how the well produced afterwards. The choke size is shown exactly as filed: Oklahoma records it in inches on some reports and in sixty-fourths of an inch on others, and names the unit on neither. A dash is a measurement Oklahoma did not file, or one it filed outside any physically possible range.
Casing
| String | Size (in) | Weight (lb/ft) | Grade | Set (ft) | Cement (sacks) |
|---|---|---|---|---|---|
| INTERMEDIATE | 9 5/8 | 40 | J-55 | 5,508 | 1,693 |
| INTERMEDIATE | 7 | 26 | HCP-110 | 10,990 | 824 |
| PRODUCTION | 4 1/2 | 13.5 | HCP-110 | 15,960 | 584 |
| SURFACE | 13 3/8 | 48 | H-40 | 704 | 889 |
Drilling permit
Oklahoma files 1 application to drill this well, naming 1 target formation. A permit records what an operator asked to do, not what it did. A target formation is where the operator aimed, and the hole may have missed it, stopped short of it or never been drilled.
Filed 2013-04-03
WRADRHorizontal holeTarget formation
| Formation | Expected top (ft) |
|---|---|
| DES MOINES | 10,444 |
An expected top is the depth the operator predicted before drilling, on the application it filed with Oklahoma. It is not a measurement of where the formation was found.
Location
35.739440, -99.751600
Every well in Roger Mills County, Oklahoma
Oklahoma state record, from OK_wells_rbdms-wells.parquet. Corpus built 2026-09-11.