E. E. COAN #7

API 3513520274 · Sequoyah County, Oklahoma

ACGAS
API
3513520274
Operator
MMGK ARKOMA LLC
County
Sequoyah

Completion

Oklahoma files 1 completion report for this well. One carries a production test the operator filed.

Completion 1

STRAIGHT HOLEACGAS
Spudded
1996-08-14
Drilling finished
1996-08-26
Completed
1996-09-03
Recompleted
2010-08-20
First production
1996-10-18
Total depth
3,050 ft
Operator
MMGK ARKOMA LLC

Interval

FormationProducedPerforated (ft)
UPPER ATOKAGAS1,866–2,662

Production test

TestedOil (bbl/d)Gas (MCF/d)Water (bbl/d)Gravity (°API)Shut-in (psi)Choke
2010-08-250700—763/8

A production test is one measurement the operator made on one day and filed with Oklahoma. It is not a monthly average and it does not describe how the well produced afterwards. The choke size is shown exactly as filed: Oklahoma records it in inches on some reports and in sixty-fourths of an inch on others, and names the unit on neither. A dash is a measurement Oklahoma did not file, or one it filed outside any physically possible range.

Casing

StringSize (in)Weight (lb/ft)GradeSet (ft)Cement (sacks)
PRODUCTION4 1/210.5J-552,80140
CONDUCTOR1665H-4051260
SURFACE8 5/832J-55462175

Drilling permits

Oklahoma files 2 applications to drill this well, naming 2 target formations. A permit records what an operator asked to do, not what it did. A target formation is where the operator aimed, and the hole may have missed it, stopped short of it or never been drilled.

Filed 1996-07-02

WRADR
Permit API
35135202740000
Operator
STEPHENS PRODUCTION COMPANY
Well type
GAS
Approved
1996-07-02
Expires
1997-01-16
Proposed depth
3,000 ft
Surface casing
425 ft
Ground elevation
421 ft

Target formation

FormationExpected top (ft)
ATOKA UP2,000

An expected top is the depth the operator predicted before drilling, on the application it filed with Oklahoma. It is not a measurement of where the formation was found.

Application

REJRCStraight hole
Permit API
35135202740000
Operator
STEPHENS PRODUCTION COMPANY
Well type
GAS
Expires
1997-01-16
Proposed depth
3,050 ft
Surface casing
462 ft
Ground elevation
421 ft

Target formation

FormationExpected top (ft)
ATOKA UP2,000

An expected top is the depth the operator predicted before drilling, on the application it filed with Oklahoma. It is not a measurement of where the formation was found.

Location

35.340363, -94.550606

35.34036, -94.55061 · Surface location as filed with Oklahoma

Every well in Sequoyah County, Oklahoma

Oklahoma state record, from OK_wells_rbdms-wells.parquet. Corpus built 2026-09-11.