WILLIE BRITTAIN #1

API 3513703241 · Stephens County, Oklahoma

ACTM
API
3513703241
Operator
STEPHENS & JOHNSON OPERATING CO
County
Stephens

Completions

Oklahoma files 2 completion reports for this well. One carries a production test the operator filed.

Completion 2

SERVICE WELLACTM
Spudded
1949-03-28
Drilling finished
1949-06-23
Completed
1949-09-10
Recompleted
2022-04-22
First production
1949-09-10
Total depth
7,042 ft
Operator
STEPHENS & JOHNSON OPERATING CO

Interval

FormationProducedPerforated (ft)
HUMPHREYSDISP2,310–2,533

Casing

StringSize (in)Weight (lb/ft)GradeSet (ft)Cement (sacks)
LINER4 1/211J-5513050
PRODUCTION723J-55 & N-806,660900
SURFACE13 3/848—186200

Completion 3

STRAIGHT HOLEACTM
Spudded
1949-03-28
Drilling finished
1949-06-23
Completed
1949-09-10
Recompleted
2024-09-17
First production
1949-09-10
Total depth
7,042 ft
Operator
STEPHENS & JOHNSON OPERATING CO

Interval

FormationProducedPerforated (ft)Treatment
MARKHAMOIL1,590–1,653Acid

Production test

TestedOil (bbl/d)Gas (MCF/d)Water (bbl/d)Gravity (°API)Shut-in (psi)Choke
2024-10-015050300—

A production test is one measurement the operator made on one day and filed with Oklahoma. It is not a monthly average and it does not describe how the well produced afterwards. The choke size is shown exactly as filed: Oklahoma records it in inches on some reports and in sixty-fourths of an inch on others, and names the unit on neither. A dash is a measurement Oklahoma did not file, or one it filed outside any physically possible range.

Casing

StringSize (in)Weight (lb/ft)GradeSet (ft)Cement (sacks)
PRODUCTION723J-55 / N-806,660900
LINER4 1/211J-5513050
SURFACE13 3/848—186200

Drilling permit

Oklahoma files 1 application to drill this well, naming 1 target formation. A permit records what an operator asked to do, not what it did. A target formation is where the operator aimed, and the hole may have missed it, stopped short of it or never been drilled.

Filed 2025-02-24

WRARCStraight hole
Permit API
35137032410001
Operator
STEPHENS & JOHNSON OPERATING CO
Approved
2025-07-18
Expires
2027-01-18
Proposed depth
7,042 ft
Surface casing
186 ft
Ground elevation
1,026 ft

Target formation

FormationExpected top (ft)
MARKHAM1,590

An expected top is the depth the operator predicted before drilling, on the application it filed with Oklahoma. It is not a measurement of where the formation was found.

Location

34.500750, -97.742532

34.50075, -97.74253 · Surface location as filed with Oklahoma

Every well in Stephens County, Oklahoma

Oklahoma state record, from OK_wells_rbdms-wells.parquet. Corpus built 2026-09-11.