ROBBERSON #6

API 3513704222 · Stephens County, Oklahoma

ACOIL
API
3513704222
Operator
STEPHENS & JOHNSON OPERATING CO
County
Stephens

Completions

Oklahoma files 2 completion reports for this well. One carries a production test the operator filed.

Completion 1

STRAIGHT HOLEACOIL
Spudded
1949-04-02
Drilling finished
1949-04-07
Completed
1949-04-29
First production
1949-04-29
Total depth
4,281 ft
Operator
STEPHENS & JOHNSON OPERATING CO

Casing

StringSize (in)Weight (lb/ft)GradeSet (ft)Cement (sacks)
PRODUCTION5.514J-554,245450
SURFACE13.37548J-551,290275

Completion 2

STRAIGHT HOLEACOIL
Spudded
1949-04-02
Drilling finished
1949-04-07
Completed
1949-04-29
Recompleted
2017-10-20
First production
1949-04-29
Total depth
4,281 ft
Operator
STEPHENS & JOHNSON OPERATING CO

Interval

FormationProducedPerforated (ft)
SYCAMOREOIL3,964–4,188

Production test

TestedOil (bbl/d)Gas (MCF/d)Water (bbl/d)Gravity (°API)Shut-in (psi)Choke
2017-10-20110033.60—

A production test is one measurement the operator made on one day and filed with Oklahoma. It is not a monthly average and it does not describe how the well produced afterwards. The choke size is shown exactly as filed: Oklahoma records it in inches on some reports and in sixty-fourths of an inch on others, and names the unit on neither. A dash is a measurement Oklahoma did not file, or one it filed outside any physically possible range.

Casing

StringSize (in)Weight (lb/ft)GradeSet (ft)Cement (sacks)
PRODUCTION5.514J-554,245450
SURFACE13.37548J-551,290275

Drilling permit

Oklahoma files 1 application to drill this well, naming 1 target formation. A permit records what an operator asked to do, not what it did. A target formation is where the operator aimed, and the hole may have missed it, stopped short of it or never been drilled.

Filed 2020-01-15

WRARCStraight hole
Permit API
35137042220001
Operator
STEPHENS & JOHNSON OPERATING CO
Well type
NT
Approved
2020-01-15
Expires
2021-07-15
Proposed depth
4,281 ft
Surface casing
1,290 ft
Ground elevation
1,230 ft

Target formation

FormationExpected top (ft)
MISSISSIPPI LM3,964

An expected top is the depth the operator predicted before drilling, on the application it filed with Oklahoma. It is not a measurement of where the formation was found.

Location

34.429812, -97.685804

34.42981, -97.68580 · Surface location as filed with Oklahoma

Every well in Stephens County, Oklahoma

Oklahoma state record, from OK_wells_rbdms-wells.parquet. Corpus built 2026-09-11.