YBLES #34-A

API 3513726240 · Stephens County, Oklahoma

ACOIL
API
3513726240
Operator
JIMMY R CHATHAM LLC
County
Stephens

Completion

Oklahoma files 1 completion report for this well. One carries a production test the operator filed.

Completion 0

STRAIGHT HOLEACOIL
Spudded
2005-06-25
Drilling finished
2005-06-30
Completed
2005-07-26
First production
2005-08-01
Total depth
1,024 ft
Operator
JIMMY R CHATHAM LLC

Interval

FormationProducedPerforated (ft)
PERMIANOIL701–972

Production test

TestedOil (bbl/d)Gas (MCF/d)Water (bbl/d)Gravity (°API)Shut-in (psi)Choke
2005-08-0130100280—

A production test is one measurement the operator made on one day and filed with Oklahoma. It is not a monthly average and it does not describe how the well produced afterwards. The choke size is shown exactly as filed: Oklahoma records it in inches on some reports and in sixty-fourths of an inch on others, and names the unit on neither. A dash is a measurement Oklahoma did not file, or one it filed outside any physically possible range.

Casing

StringSize (in)Weight (lb/ft)GradeSet (ft)Cement (sacks)
PRODUCTION5 1/215.5J-551,024240

Drilling permits

Oklahoma files 2 applications to drill this well, naming 2 target formations. A permit records what an operator asked to do, not what it did. A target formation is where the operator aimed, and the hole may have missed it, stopped short of it or never been drilled.

Filed 2005-06-24

WRADR
Permit API
35137262400000
Operator
JIMMY R CHATHAM LLC
Well type
OIL
Approved
2005-06-24
Expires
2005-12-24
Proposed depth
1,050 ft

Target formation

FormationExpected top (ft)
PERMIAN600

An expected top is the depth the operator predicted before drilling, on the application it filed with Oklahoma. It is not a measurement of where the formation was found.

Filed 2024-12-12

WRARCStraight hole
Permit API
35137262400001
Operator
JIMMY R CHATHAM LLC
Well type
NT
Approved
2025-06-02
Expires
2026-12-02
Proposed depth
1,050 ft
Ground elevation
1,195 ft

Target formation

FormationExpected top (ft)
PERMIAN600

An expected top is the depth the operator predicted before drilling, on the application it filed with Oklahoma. It is not a measurement of where the formation was found.

Location

34.439731, -97.700280

34.43973, -97.70028 · Surface location as filed with Oklahoma

Every well in Stephens County, Oklahoma

Oklahoma state record, from OK_wells_rbdms-wells.parquet. Corpus built 2026-09-11.