DONOHEW #3-16

API 3513726481 · Stephens County, Oklahoma

ACGAS
API
3513726481
Operator
TERRITORY RESOURCES LLC
County
Stephens

Completions

Oklahoma files 2 completion reports for this well. 2 carry a production test the operator filed.

Completion 1

DIRECTIONAL HOLEACGAS
Spudded
2007-02-16
Drilling finished
2007-05-05
Completed
2007-06-19
Recompleted
2010-05-06
First production
2007-06-02
Total depth
16,500 ft
Operator
TERRITORY RESOURCES LLC

Intervals

FormationProducedPerforated (ft)Treatment
DEESE GROUPGAS12,400–12,936Frac
DORNICK HILLSDRY13,754–14,740Frac

Production test

TestedOil (bbl/d)Gas (MCF/d)Water (bbl/d)Gravity (°API)Shut-in (psi)Choke
2010-05-291182,15832535,28418/64

A production test is one measurement the operator made on one day and filed with Oklahoma. It is not a monthly average and it does not describe how the well produced afterwards. The choke size is shown exactly as filed: Oklahoma records it in inches on some reports and in sixty-fourths of an inch on others, and names the unit on neither. A dash is a measurement Oklahoma did not file, or one it filed outside any physically possible range.

Casing

StringSize (in)Weight (lb/ft)GradeSet (ft)Cement (sacks)
PRODUCTION4 1/215.1P-11016,4902,450
INTERMEDIATE9 5/853.5P-11011,4252,050
SURFACE13 3/854.5J-551,5671,020

Completion 2

DIRECTIONAL HOLEACGAS
Spudded
2007-02-16
Drilling finished
2007-05-05
Completed
2007-06-19
Recompleted
2014-04-17
First production
2007-06-02
Total depth
16,500 ft
Operator
TERRITORY RESOURCES LLC

Intervals

FormationProducedPerforated (ft)
DEESE GROUPGAS12,400–12,936
DORNICK HILLSGAS13,754–14,740

Production test

TestedOil (bbl/d)Gas (MCF/d)Water (bbl/d)Gravity (°API)Shut-in (psi)Choke
2014-04-28421,64512—2,13512/64

A production test is one measurement the operator made on one day and filed with Oklahoma. It is not a monthly average and it does not describe how the well produced afterwards. The choke size is shown exactly as filed: Oklahoma records it in inches on some reports and in sixty-fourths of an inch on others, and names the unit on neither. A dash is a measurement Oklahoma did not file, or one it filed outside any physically possible range.

Casing

StringSize (in)Weight (lb/ft)GradeSet (ft)Cement (sacks)
PRODUCTION4 1/215.1P-11016,4902,450
INTERMEDIATE9 5/853.5P-11011,4252,050
SURFACE13 3/854.5J-551,5671,020

Drilling permits

Oklahoma files 2 applications to drill this well, naming 8 target formations. A permit records what an operator asked to do, not what it did. A target formation is where the operator aimed, and the hole may have missed it, stopped short of it or never been drilled.

Filed 2006-11-15

WRADR
Permit API
35137264810000
Operator
CHESAPEAKE OPERATING LLC
Well type
GAS
Approved
2006-11-15
Expires
2007-05-15
Proposed depth
17,000 ft
Surface casing
1,500 ft
Ground elevation
1,269 ft

Target formations

FormationExpected top (ft)
PERMIAN1,000
CISCO6,300
HOXBAR UP10,200
HOXBAR LOW10,950
DEESE GP11,500
DORNICK HILLS13,500

An expected top is the depth the operator predicted before drilling, on the application it filed with Oklahoma. It is not a measurement of where the formation was found.

Filed 2014-03-27

WRARCDirectional hole
Permit API
35137264810002
Operator
CHESAPEAKE OPERATING LLC
Well type
NT
Approved
2014-03-27
Expires
2014-09-27
Proposed depth
16,500 ft
Surface casing
1,567 ft
Ground elevation
1,269 ft

Target formations

FormationExpected top (ft)
DEESE GP12,400
DORNICK HILLS13,751

An expected top is the depth the operator predicted before drilling, on the application it filed with Oklahoma. It is not a measurement of where the formation was found.

Location

34.643460, -97.948140

34.64346, -97.94814 · Surface location as filed with Oklahoma

Every well in Stephens County, Oklahoma

Oklahoma state record, from OK_wells_rbdms-wells.parquet. Corpus built 2026-09-11.