ORIN #2-9H
API 3513727476 · Stephens County, Oklahoma
Completion
Oklahoma files 1 completion report for this well. One carries a production test the operator filed.
Completion 0
HORIZONTAL HOLEACOILInterval
| Formation | Produced | Perforated (ft) | Treatment |
|---|---|---|---|
| SPRINGER | OIL | 13,857–18,853 | Acid, Frac |
Production test
| Tested | Oil (bbl/d) | Gas (MCF/d) | Water (bbl/d) | Gravity (°API) | Shut-in (psi) | Choke |
|---|---|---|---|---|---|---|
| 2016-12-18 | 184 | 2,938 | 1,385 | 51 | 1,313 | 20 |
A production test is one measurement the operator made on one day and filed with Oklahoma. It is not a monthly average and it does not describe how the well produced afterwards. The choke size is shown exactly as filed: Oklahoma records it in inches on some reports and in sixty-fourths of an inch on others, and names the unit on neither. A dash is a measurement Oklahoma did not file, or one it filed outside any physically possible range.
Casing
| String | Size (in) | Weight (lb/ft) | Grade | Set (ft) | Cement (sacks) |
|---|---|---|---|---|---|
| INTERMEDIATE | 9.58 | 40 | P-110HC | 11,795 | 945 |
| PRODUCTION | 4.5 | 15.1 | P-110 | 19,000 | 780 |
| LINER | 7 | 23 | P-110HC | 2,072 | 260 |
| SURFACE | 13.38 | 68 | J-55 | 3,531 | 1,790 |
| SURFACE | 20 | 106.5 | J-55 | 720 | 805 |
Drilling permit
Oklahoma files 1 application to drill this well, naming 1 target formation. A permit records what an operator asked to do, not what it did. A target formation is where the operator aimed, and the hole may have missed it, stopped short of it or never been drilled.
Filed 2016-08-22
WRADRHorizontal holeTarget formation
| Formation | Expected top (ft) |
|---|---|
| SPRINGER | 12,941 |
An expected top is the depth the operator predicted before drilling, on the application it filed with Oklahoma. It is not a measurement of where the formation was found.
Location
34.667599, -97.737340
Every well in Stephens County, Oklahoma
Oklahoma state record, from OK_wells_rbdms-wells.parquet. Corpus built 2026-09-11.